Used Ideal Bss for sale (31)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Ljdpez D Hyyjfx Af Sort Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Lsdpfx Aozz Sdzsf Sort Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, input voltage: 400 V, total height: 1,700 mm, total width: 1,300 mm, total length: 1,000 mm, welding power (max.): 45 kVA, overall weight: 850 kg, Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 1000*1350*1700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Lrodpfx Afjzz R I Es Sjt Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

Condition: excellent (used), Ideal/EBA cutting machine! In excellent condition, available for inspection and testing at our location. All the equipment mentioned is not for sale or resale in Russia, or in any country subject to an EU embargo. Lsdpfxsy Uhlqo Af Sort

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, 1x Professional high-volume shredder from Ideal, model: 4606 CC, security level: P-5 - with oiler. Used only a few times! Lrodpfxszz R E Dj Af Sot In very good, fully functional condition, manufactured in 2024. Price quoted net, plus VAT. Shipping possible upon request, subject to an additional charge.

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Lredpfxjzzzgfe Af Sst

Condition: excellent (used), Band saw welder IDEAL model BSO Lrjdpoxw H Srofx Af Set

Condition: good (used), Cutting machine Ideal 5560 The machine comes from a government agency. Lodpfxox Sx A Us Af Sert Item no. L1122

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Please contact us for more information. Lrodpfxsbqh R Tj Af Sst

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Ljdezt H Tzopfx Af Sjrt Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Ledpfozt H S Dsx Af Sert Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Ledsztz Elspfx Af Ssrt Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Ljdpowfg Ewofx Af Ssrt

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Lrodszudivopfx Af Set Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Equipment 2 knives Ledpfx Aefbgayjf Ssrt

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Lodpfx Asw Snu Sef Sjrt Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: ready for operation (used), functionality: fully functional, Stack cutter IDEAL 4850-95 EP WITH AUTOMATIC PRESSING AND BACK GAUGE PROGRAM CONTROL 475 mm cutting length | electro-mechanical knife drive | automatic pressing | electrically operated back gauge with “EP” control module | electronic handwheel with continuously adjustable speed for manual back gauge fine adjustment | optical cutting indicator | pressure bar guided on both sides, controllable independently of the knife | precision back gauge spindle | adjustable back gauge rack with fine pitch and plastic sliders | two side guides each on the front and back table | all-steel knife carrier and adjustable knife guides | complete with base frame and paper stacking table | Ledpfxozqzxgo Af Sort Electronically controlled, pivoting safety device on the front table; transparent safety cover on the back table; main switch and safety lock with key; two-hand cutting release with repeat lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic knife and pressure bar return from any position; disc brake for immediate knife stop; knife changing device with covered knife edge; knife depth adjustment from the outside; easy knife change from the front, without removing housing parts. Power connection: 230 V / 50 Hz / Dimensions (H x W x D): 1230 x 755 x 970 mm, Weight: 215 kg, Color: pearl grey. Cutting length 475 mm Cutting height 80 mm Remaining cut 35 mm Feed depth 450 mm Power connection 230 V / 50 Hz Our offers refer to used machines, which may show signs of use (minor scratches or discoloration).

Condition: excellent (used), Overview This IDEAL 7260, also badged as the EBA 7260 Guillotine, has completed under 52,000 cuts since new. It was manufactured in December 2021 but first installed in May 2022. This 72cm width guillotine offers the user the benefits of cutting SRA1 in half or SRA2 to each side. The IDEAL 7260 Hydraulic Guillotine is a heavy-duty programmable paper cutter designed for commercial printers, digital print providers and busy finishing departments requiring exceptional cutting accuracy, productivity and operator safety. Also sold as the EBA 7260, both machines are manufactured in Germany by the same company and are identical in specification and performance. Professionally refurbished by our engineers, this machine has been fully serviced, tested and prepared for immediate production. Featuring a generous 720mm cutting width, 80mm cutting capacity and a fully programmable electronic backgauge, the IDEAL 7260 or EBA 7260 delivers fast, repeatable accuracy for everything from short-run digital work to high-volume commercial print production. The electro-mechanical blade drive is combined with a powerful hydraulic clamp, delivering fast, accurate and repeatable cutting performance. While IDEAL's renowned Safety Cutting System (SCS) provides one of the safest working environments available in its class. Built entirely from heavy-duty steel components and fitted with premium German HSS cutting blades, the IDEAL 7260 or EBA 7260 guillotine is engineered to provide years of reliable service. Key Features Hydraulic cutting and clamping system 720mm cutting width 80mm cutting height Fully programmable electronic backgauge 99 programmes with up to 99 steps per programme Front and rear air tables for effortless paper handling Electronic hand wheel with variable speed positioning Infrared safety curtain Patented EASY-CUT two-hand blade activation Heavy-duty all-metal construction High-quality German HSS cutting blade Safe blade changing device Supplied complete with tool holder and spare blade Side Tables can be added if required What's Included Refurbished IDEAL 7260 Hydraulic Guillotine Programmable electronic backgauge Front and rear air tables Spare blade Blade changing tool Tool holder Fully serviced, tested and production ready Includes 6 month Health & Safety certification Why Choose this IDEAL 7260? Professional hydraulic cutting for fast, effortless operation Newest, current model with large touchscreen control Less than 60,000 cuts since new First installed in May 2022 Lodpfxjzqu Sme Af Sert Accurate programmable backgauge reduces setup time and improves productivity Large 720mm cutting width accommodates a wide range of print sizes Air tables make handling heavy paper stacks quick and easy IDEAL Safety Cutting System provides outstanding operator protection Heavy-duty German engineering built for long-term reliability Perfect for commercial printers, digital print providers, universities and in-house print rooms

Condition: used, Guillotine Ideal 4850-95 EP with Program and automatic Spindle Press. Ledozhppbjpfx Af Sjrt Stapelschneider mit EP-Steuerungsmodulmit und automatischer Spindelschnellpressung. Schneidmaschine / Gullotine IDEAL 4850-95 EP Baujahr / Year 2004 - Serial-No. 3087585 Schnittbreite / Cutting width max. 475mm Schnitthöhe /  Cutting height 80mm Programm Linker Seitentisch / Left side table Ersatzmesser / Spare Knife Mit Bedienungsanleitung / Woith operartion manual Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 19170, 4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ljdpfjh Axygsx Af Ssrt Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, IDEAL 7228-06 cutting machine, machine number 2828609, manufactured in 2007, with programmable control and light barriers, in good condition, immediately available. If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our premises after prior arrangement of an appointment. Lredpfjzkcbvsx Af Set

Condition: excellent (used), Working range (welding range) Copper Ø 0.6 – 2.4 mm Aluminium Ø 0.8 – 3.0 mm Brass Ø 0.8 – 3.0 mm Weight 16 kg With annealing function after welding and wire cutter Lrjdsznbtfspfx Af Set Mains voltage 230 V

Condition: good (used), functionality: fully functional, We are offering this well-maintained IDEAL 4700 paper cutting machine for sale. It comes complete with a base frame. Lsdpfx Afjzlunwj Ssrt With a cutting length of 475 mm and a maximum stack height of 80 mm, it allows for effortless cutting of paper stacks up to DIN A3 size. Manufacturer: IDEAL 4700 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Very nice paper cutting machine for sale. Brand: Ideal. Type: 5221-95 EP, with 9 programs and 230-volt power supply. Comes complete with all accessories. You are welcome to test this machine at our premises. Lrsdpfx Afozlqkno Sst We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). If you would like to purchase this machine, please send us your company details and your VAT number. We will then send you a proforma invoice. Best regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6173431, Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Ljdpsulxg Dofx Af Ssrt Condition: Very good condition / total revised about 1.5 years ago