Used 2-Phase-Decanter for sale (77,970)

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm Djdpfx Acjyrdlae Neki L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Dkodeyf Hw Sepfx Ac Nji

Condition: like new (used), Myford 254s Single Phase 220v Lathe Excellent condition like brand new hardly used Dkodjx Utymopfx Ac Nei Distance between centres 22" 10" swing Imperial machine Spindle speeds 53-2000rpm Tail stock morse taper 2 Fixed and travelling steady 6" 4 Jaw chuck 5" 3 jaw chuck 11" Faceplate Single phase 230v

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GA0 3-Phase Permanent Magnet Motor SN: MDD071-23219, used, normal signs of use, 100% functional, scope of delivery as per photos Dkedpji D Ng Dsfx Ac Nji

Condition: ready for operation (used), Rexroth MAC112B-0-GD-3-C / 130-A-0 3~Phase Permanent Magnet Motor SN: MAC112-56238 ,used, good condition, 100% working, scope of supply acc. photos Dkodpfoi D Nf Uex Ac Nsi

Condition: ready for operation (used), Indramat 2AD132B-B35RB1-BS03-A2N1 3-Phase Induction Motor , serial no. as per photo , used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dsdpsi D If Defx Ac Noki

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose Dkedjyc Ig Aspfx Ac Nei • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Dedpfx Acoxn Ax As Noki

Condition: excellent (used), • Type: SK40-2/20-70 (DIN 69871) • Taper: SK40 • ER collets included (various diameters, complete set) • Tools mounted in holders – drills, milling cutters, counterbores (visible in the photos) • Holder length: 70 mm • Set ready for use – just mount in your CNC machine • Condition: used, very good, complete (minimal signs of wear) • Individual pieces or the whole set available for purchase • Price per item. Dodpfx Aoxa H H Usc Neki

Year of construction: 2006, condition: good (used), For sale are 3 Siemens pick-and-place machines, consisting of: - 1 unit X 2 (year 2006) B 348 = €16,000 + VAT - 1 unit X 2 (year 2006) B 251 = €16,000 + VAT - 1 unit X 3 (year 2005) B 111 = €16,000 + VAT All three machines have been inspected and fully tested for functionality in our specialist workshop. Each machine has a valid MFU (machine function certificate). Dkjdpoyrm E Asfx Ac Nji An on-site inspection is possible and welcome. Please refer to the photos for the technical specifications and configuration of the individual machines; we are also happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for every machine. We are also happy to carry out modifications for your specific application at an additional cost. The systems are sold without placement tables and without MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding.

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Djdpfoynfuhex Ac Nski Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Side and front margins. Instructions included.

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Autotransporter REPO R2P – Top Quality for Safe Vehicle Transport! This trailer is the ideal solution for the secure and professional transport of: • Construction machinery and excavators • Other vehicles ✅ Robust and durable construction ✅ High stability and safety on the road ✅ Perfect for private and commercial use This car transporter stands out for its quality, reliability, and well-thought-out design – perfect for anyone who wants to transport their vehicle safely to its destination. Technical specifications: • Brand: REPRO • Model: Vehicle transporter • Permissible total weight: 3,500 kg • Unladen weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5,290 mm • Width: 2,100 mm • Load bed length: 3,500 mm • Drawbar load: 150 kg Condition: The trailer is in absolutely as-new condition and ready for immediate use. Dkedpfx Ajyqyf Tec Noi Location: Rheda-Wiedenbrück Price: €4,790 net plus VAT If you are interested or have any questions, please get in touch! Viewing on site is possible by appointment.

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm Dkedpfxjymnbbe Ac Nsi - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Buyer have to arrange disassembly on site. Seller arrange crain, liftruck, full support on site + technical support. Djdpfox Idkpex Ac Njki

Condition: good (used), Baumann BSB-2 Paper Jogger The machine is 100% functional and ready to use. Technical specifications: Dksdjyl Rx Hepfx Ac Noi Maximum format: 640×920 mm Stack height: 160 mm Weight: 350 kg Power supply: 400 V Air table Tilt angle adjustment

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Dedpoxmt Eqsfx Ac Neki

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. Dsdpfx Acsxl Dbto Njki The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Dkedpox S Ewrofx Ac Nji

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner, load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 amps. Dimensions: Length: 1940 mm, Width: 1200 mm, Table diameter: 1200 mm. Height when tilted: min. 700 mm, max. 1550 mm. Height horizontal: min. 900 mm, max. 1700 mm. Weight: 1750 kg. Dkodpfox Tif Aox Ac Noi

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Dkjdpfxohktq Ae Ac Noi Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Dkodpfox R Dv Rjx Ac Nsi Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Dkedpfx Acoyhhn Do Nsi Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° Dkjdpfxoykkx De Ac Nsi • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation . Dkjdpfsykiqfex Ac Noi

Condition: used, functionality: fully functional, 2-bag dust extraction unit 4.0 kW – after technical inspection, ready for operation Specification: Dksdjyiatrspfx Ac Noi • Condition: used • Turbine motor power: 4.0 kW (3-phase) • Turbine inlet: 250 mm • Collection bag diameter: 2 x Ø600 mm • Capacity: ~6000 m3/h • 2 filter bags, size 600 x 1300 mm – new • Overall dimensions: 180 x 85 x 270 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • The auction price does not include VAT or transport costs Financing and transport: • We organize transportation via MDD fleet, courier services, or third-party carriers • We provide financial support in the form of leasing or lease loan