Used coilers for sale (129)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz Klsdpjwvv Rqefx Ap Aew - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Klsdpfx Apeua Nngs Aew Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Klodpfxju A T Hzs Ap Aew Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg Ksdpfxsv I Ur Eo Ap Aolw

Condition: used, Year of construction: 1995, sheet width 300 mm coil weight 1,5 t coil internal dia. 400 - 500 mm Klodpfsr Hginjx Ap Ajw je Arm 670 mm total power requirement kW weight of the machine ca. 760 kg dimensions of the machine ca. T 1,23 x B 1,7 x H 1,1 m

Condition: like new (used), functionality: fully functional, coil inner diameter: 508 mm, coil outer diameter: 2,000 mm, coil weight: 16,000 kg, coil width: 1,000 mm, product width (max.): 1,250 mm, year of last overhaul: 2022, Self-centering FLENDER recoiler + 2 self-centering FROHLING decoilers Coil set: TWO DECOILERS and ONE RECOILER Brand: - Frohling for decoilers - Flender for recoiler Completely overhauled and upgraded with AUTO-CENTERING and linear guides in 2022 (units were already in excellent condition, but lacked all accessories and the CPC auto-centering system) Capacity: 16MT Coil ID: 508mm / OD: 2000mm Max strip width: 1100mm (modifiable to 1250mm) Max line speed: 240m/min Kjdpfx Aou Hlaujp Aslw Independent lubrication with filter and pump Supplied without motors and speed gearboxes Ready for any inspection at our warehouse in Rovereto (TN), Italy If you have any questions, do not hesitate to contact us. IF INTERESTED, PLEASE CONTACT US — WE WILL CERTAINLY REACH AN AGREEMENT.

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm Kljdpjcdrmisfx Ap Asw band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted

Condition: good (used), Coil reel, unwinding reel, winding reel Load capacity: 10 tons Spreading range: up to 508 mm Spreading mandrel length: 1500 mm Several units available Frequency inverter control Kjdeipx Ufjpfx Ap Aelw Control cabinet has been newly refurbished. Hydraulic tensioning of the coil. The reel can be moved laterally using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: good (used), Year of construction: 1985, Decoiler for unwinding rolls of sheet, e.g. zinc. Brand: Kader BV Type: Geska 4 Year of construction: 1985 Engine: 0.25 kW Kjdpoqctq Ejfx Ap Aolw Mains voltage: 380 V Rear roller diameter: ± 450 mm Machine is in very clean condition.

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t coil internal dia. mm Kedpor Eth Iofx Ap Aelw total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Year of construction: 2025, Single band console decoiler 500 mm - Loading capacity 1.500 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 500 mm Kjdpsfvbxqefx Ap Aslw

Condition: used, Year of construction: 1988, sheet width 150 mm coil weight t coil internal dia. mm total power requirement kW Klodjr Eth Djpfx Ap Asw weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes Kljdpfxexd Rgaj Ap Ajw - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Klodpfx Aoxd Rgmsp Aow - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Singel band decoiler OD-L 1250/1: Kljdett Iqzjpfx Ap Aew - 5 arms, Roller bearings, with disc - Loading capacity: 1.000 kg - Working width: 1.250mm - Inner diameter 280-520mm - Delivery time: 10 days

Condition: ready for operation (used), Decoiler with 1 to x 380-460 mm width, coil-inside-diam. 340 - 440 mm, outside-diam. 1100 mm under power Klodpfxjuviffe Ap Aew

Condition: used, sheet width 320 mm coil weight 1,5 t coil outside dia. 1250 mm Kedpfx Aeqkwviop Ajlw diameter of the mandrel 370/430 mm Mandrel height 1000

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Scope of supply includes: - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Uncoiler rotation/lock: Hydraulic Uncoiler traverse for alignment: Hydraulic Kledpsymadzofx Ap Ajw Brake pneumatically-operated disc: OTO Mills

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Kljdpfexd Rgyex Ap Asw

Condition: new, Year of construction: 2025, Single band console decoiler (1000 mm - up to 1,0 t stationary - Inner φ480-530 mm Kedpfx Aefvbv Ssp Ajlw - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.000 mm

Condition: new, Year of construction: 2025, Single band console decoiler 1000 mm with wheels - Loading capacity 1.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Ksdefvbwzepfx Ap Aolw - max coil width: 1.000 mm

Year of construction: 2023, condition: used, sheet width 300 mm coil weight 1 t coil internal dia. 375-550 mm coil outside dia. 1600 mm weight of the machine ca. 0,5 t Kodpfx Aolp U Tbop Ajlw dimensions of the machine ca. 1500x1500x1900 m

Condition: used, sheet width 250 mm Kedpfx Apjizxu Uj Aslw coil weight 2,5 t coil internal dia. 450 - 530 mm sheet thickness - max. 4 mm coil outside dia. 1400 mm total power requirement kW weight of the machine ca. 1000 kg Overall size 1,95 x 1,95 x 1,7 mm

Condition: new, Year of construction: 2025, Singel band decoiler with wheels OD-LK 1250/1: - 5 arms, Roller bearings, with disc - Loading capacity: 1.000 kg - Working width: 1.250mm - Inner diameter 280-520mm - Delivery time: 10 days Kodpfx Aott Iuaep Aelw

Condition: used, JOINT Decoiler – Used – CE Kjdpfx Ajx N S H Iop Aelw Model: JDM 8.0 S Capacity: 8,000 kg Weight: 3,700 kg Year of manufacture: 2003 Available quantity: 2 units