Used Machining centers (vertical) X-axis travel 700-799mm for sale (238)

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger. Ceb Hb Uoq R Tnzoi Esgt

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm Control Heidenhain 530 Csb Hbjrpq A Sj Ui Eogt total power requirement kW weight of the machine ca. 6700 kg dimensions of the machine ca. m

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Ceb Hb Uisuqi A Hj Eogt

Condition: reconditioned (used), Year of construction: 2005, operating hours: 5 h, Functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of slots in tool magazine: 30, swivel angle B-axis (min.): -10 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, Spindle overhaul in December 2024 - geometry protocol available below Vertical machining center with linear drive technology and gantry design for maximum precision TECHNICAL DETAILS X-path: 750 mm Y-path: 650 mm Z-path: 650 mm C-axis: 360° B-axis: -10° to +110° Control: HEIDENHAIN iTNC 530 Spindle Ceb Hbsvkcy No Ui Ejgt Spindle speeds (infinitely variable): 1 - 18,000 rpm Tool holder: HSK-A 63 Table Table diameter: 750 mm Table load: max. 0.6 t Tool magazine Capacity: 30 places MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 12,000 kg Control system switch-on time: 11,679 h Machine switch-on time: 10,985 h Program run time: 5,070 h Spindle running time: 4,753 h - after overhaul in December 2024: 5 h EQUIPMENT - Direct path measuring system - Bed flushing - IKZ - internal coolant supply through the center of the spindle - Paper belt filter incl. Visiport and rinsing gun - Cooling device with blast air on the outside of the spindle - Temperature compensation - Active cooling unit for drives, control cabinet and motor spindle - Scraper belt chip conveyor - Tool breakage check incl. tool length and diameter measurement via laser Calibration ring - Heidenhain measuring probe - Heidenhain 410 manual control panel for set-up mode - documentation

Condition: good (used), Year of construction: 2022, Haas UMC 1000 / 5 axles, Year of construction 2022, Haas touchscreen control, Travel X/Y/Z 1016/635/635 mm, spindle speed up to 8,100 rpm, SK 40 holder, 30-position tool changer, Control cabinet air conditioning unit, 3D measuring probe, prepared IKZ, sync. tapping, 2 axes NC swivel rotary table, chip conveyor, Switch-on hours 3800 Cobsviuu No Hb Ui Ejgt Spindle hours 1500

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM Cebetnh Als Hb Ui Eogt SET OF TOOLING SET OF MANUALS

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 750 x 610 x 550mm, 320mm Diameter table, max table weight 100kg, table tilt -120°, +30°, Ceb Hsq U R Insb Ui Eogt 14kW, 15000rpm, BT40, 30 station tool changer, Fanuc Oi-MF, swarf conveyor, through spindle coolant,

Year of construction: 1999, Condition: used, x-travel 710 mm y-travel 610 mm z-travel 610 mm control Fanuc total power requirement kW Cgsb Hb Ujqanp Uji Est weight of the machine ca. 11500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain Main spindle: turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 work table: table surface area 1.500 x 1.050 mm Cgsb Hbjugavne Ui Est max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg feeds: rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Cjb Hjt Hw Trob Ui Esgt Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: GB2-1755, travel distance X-axis: 180 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: 0i-TF Color display, workpiece length (max.): 1,000 mm, workpiece diameter (max.): 52 mm, spindle speed (min.): 4,200 rpm, spindle motor power: 2,200 W, number of slots in tool magazine: 12, tool diameter: 40 mm, Displacements - Diameter over the beat ¢650 mm - Diameter over sledge ¢365 mm - Standard machining diameter ¢234 mm - Maximum machining diameter ¢260 mm - Distance between centers 520 mm Axes - X-axis travel 130 + 50 mm - Z-axis travel 400 mm - Rapid traverse on X / Z axis 30 m/min Cgob Hb Uevfd Udji Est - X/Z axis servo motor power 1.8 kW - Ball screw X axis / pitch ¢25 / 10 mm - Ball screw Z axis / pitch ¢40 / 10 mm - Roller guide width X/Z axis 35 mm - Working feed on X/Z axis 0 - 1.260 mm/min Main shaft - Shaft type A2-6 - Universal diameter 8" / ¢210 mm - Maximum speed 4200 rpm - Main shaft motor power (cont / 30 min / 15 min) 7.5/11/15 kW - Main shaft torque (cont / 30 min) 58 / 90 / 120 Nm - Main shaft bearing diameter ¢100 mm - Maximum machining diameter in the bar ¢52 mm - Recommended bar machining length 900-1000 mm Radial turret BMT 55 - with milling - Number of positions for the tool holder 12 positions - Dimension of the porthole channel 25x25 mm - Milling speed 4000 rpm - Milling motor power 2.2 kW - Maximum tool diameter for internal turning ¢40 mm - Indexing time 0.9 sec Dimensions and Weight - Dimensions (LxWxH) 1.938 x 2.257 x 1.890 mm - Weight 3.800 kg

Condition: ready for operation (used), Year of construction: 1997, Machine-Details Stock-No. 1105-03827 Type of machine Machining Center - Vertical Make CINCINNATI Type SABRE 500 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Grossbritannien Delivery time immediately Freight basis EX WORKS Technical details x-travel 510 mm y-travel 510mm z-travel 510 mm table-size 665 x 510 mm spindle taper ISO 40 spindle turning speed range 60 - 8000 U/min rapid traverse 24 m/min Cgsb Hji Uha Dob Ui Eot spindle drive motor 9 kW tool change unit 21 fach CNC-control HEIDENHAIN TNC 426 voltage 380 V max. table load 750 kg throat 550 mm coolant ja total power requirement 30 kVA weight of the machine ca. 4,3 t Additional information - control: HEIDENHAIN TNC 426 - coolant equipment lot off tools

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 91207576A, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, torque: 45 Nm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 2,700 mm, total width: 3,000 mm, table width: 520 mm, table length: 770 mm, table load: 455 kg, rotational speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, overall weight: 3,300 kg, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, number of spindles: 2, number of slots in tool magazine: 21, tool diameter: 160 mm, tool weight: 680 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The CINCINNATI ARROW 750 CNC machining center was manufactured in 1995. And in England . Distributed by the Polish company MTI from Rybnik(documentation) - CNC control: FANUC-OMC - number of axes: 4 - feed in X/Y/Z axis: 762x510x510 mm Cob Heugn Edob Ui Esgt - working table area (L x W): 950 x 520 mm - maximum workpiece weight: 350 kg - maximum spindle speed: 6000 rpm - spindle power: 5.5 kW - 21-position tool head - tool holder: SK40 - maximum tool weight: 6.8 kg - number of T-slots: 3 -positioning accuracy +/- 4 microns -repeatability +/- 1 micron - connection power: 15.5 kW -maximum current at full load :24A -net weight :3300kg -maximum height from the ground : 2.8m -total area occupied : 2,7m(width) x 3,0m(depth) - data transmission : RS232 + LAN(TRANSMISSION ON THE NETWORK) - rotary table smoothly controlled (4 axis) model NC10B -Renishaw MP12 measuring probe (attached to the tool magazine) The machine is in excellent condition, connected to the power supply can be tested, the machine without failure (it has a Fanuc system - it has never broken down for us!) We sell because we bought a new one also on the FANUC system.

Condition: excellent (used), Haas UMC 750 CNC 5-axis machining center Year of construction: 12/2013 x-path 762 mm y-path 508 mm z-path 508 mm b-axis +35 / -110 ° c-axis 360 ° Control system Main spindle: Speed range - main spindle 8100 min/-1 Drive power - main spindle 22.4 kW Max. Torque 122 Nm Rotary table: Table clamping surface 630 x 500 mm Number of T-slots 7 pcs. T-slot width 16 mm Max. table load 300 kg Tool changer: SK 40 tool holder Cgjbjuvigve Hb Ui Est Number of tool positions 40 Pos. Feed rates: Rapid traverse ( x / y / z ) 25.4 m/min Coolant tank 284 l Installation dimensions approx. (length x width x height) 4.1 x 2.9 x 2.95 m Weight approx. 8.5 t

Condition: excellent (used), Year of construction: 2005, ISO 50, 7,500Rpm, X 1,626 Y 813 Z 762mm, ATC 30 pos. Cooling through spindle. 3.050 spindle hours. Csb Hb Usuz Uqxji Eogt

Condition: good (used), Year of construction: 2011, operating hours: 11,931 h, Functionality: fully functional, machine/vehicle number: H-S30146, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, spindle nose: BT40, TECHNICAL DETAILS X-travel: 762 mm Y-travel: 510 mm Z-travel: 610 mm Spindle speed: 10000 rpm Spindle taper: BT40 Spindle power: 11/15 kW Csb Hbsudbw Uj Ui Eegt Control: Winmax Table size: 1020 x 510 mm Table load: max. 1350 kg MACHINE DETAILS Weight: 4900 kg Dimensions: 2300 x 2400 x 2600 mm Spindle hours: 11,931 h Switch-on hours: 29,200 h EQUIPMENT - Coolant system - Chip conveyor - Software options as shown in the pictures - USB connection

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: GZ1-1177, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 48 m/min, feed rate Z-axis: 48 m/min, nominal power (apparent): 33 kVA, torque: 2,180 Nm, controller manufacturer: FANUC, controller model: 0i-MF, table height: 500 mm, table load: 300 kg, rotary table diameter: 630 mm, rotational speed (min.): 16 rpm, rotational speed (max.): 33 rpm, overall weight: 300 kg, spindle speed (max.): 15,000 rpm, distance table to spindle center: 300 mm, distance table center to spindle nose: 600 mm, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 76 mm, tool weight: 7 g, type of input current: three-phase, Equipment: chip conveyor, Standard Accessories - Fully enclosed machine (with door locking system) - Fanuc 0i-MF CNC control with 15" color screen - Manual Guide i conversational programming - VSS additional functions package (anti-collision, adaptive cutting, etc.) - Inclined plane machining command function (G68.2) - AICC-II function for High-Speed Cutting, 200 blocks look-ahead - Data server with CF card (2GB) and Ethernet - Oil cooler for the main spindle - Fanuc αT8 motor, 15,000 RPM - Chip conveyor with screw and collection cart - High-pressure cooling Grundfos SPK 4-8 - Through-spindle cooling at high pressure (20 bar) - Two hydraulic/pneumatic ports in the center of the table - Oil separator (oil skimmer) - Air conditioning system for electrical cabinet cooling - Rigid tapping - Portable MPG - Work light - Automatic workpiece and tool length/diameter measurement system (Renishaw) Cjb Hb Ujvd Dk Nei Esgt - Operating and signaling kit for persons with disabilities - Auto Part Measuring (Renishaw® RMP-600, Radio Measuring Probe) - Three-color warning lamp - Coolant spray gun - Air blow gun - 20 BT40 tool holders + 20 pull studs - Self-centering vise - CE certificate - Leveling pads and bolts - Installation tool kit - Complete documentation (operation, programming, and maintenance manuals)

Year of construction: 1998, Condition: good (used), Maschinen-Details Lagernummer 1105-02951 Maschinenart Bearbeitungszentrum - Vertikal Fabrikat FAMUP Typ MCX 700 P Baujahr 1998 Steuerungsart CNC Lagerort HAGUENAU Ursprungsland italien Lieferzeit sofort Frachtbasis EX WORK Technische Details x-Weg 700 mm y-Weg 500 mm z-Weg 640 mm Steuerung FANUC OM Spindeldrehzahl 8000 1/min Spindelmotor 22 kW Eilgänge x/y/z 40 mm/min Tischgröße 600 x 450 x 2 mm Werkzeugwechselzeit 1.5 sec Werkzeugmagazin: 30 SK 40 Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 5.5 t Zusatzinformationen contrOL FANUC OM SPINDEL 22KW 8000 U/MIN spaenefoerderer Csb Hb Uisfklf Is Eogt

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 115195, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS CNC control: OSP-E100M X-travel: 762 mm Y-travel: 460 mm Z-travel: 460 mm A-axis travel: +110° B-axis travel: +40° Table dimensions: 1,000 x 460 mm Table type: Nikken rotary table, model 5AX-120 Csb Hbovambpj Ui Eogt Spindle Spindle speed: max. 8,000 rpm Tool holder: BT40 Number of tools: 32 MACHINE DETAILS Coolant supply (pressure): 15 bar Machine dimensions (W x D x H): 2,750 x 1,900 x 2,700 mm Weight: 6 tons Connected load: 23 kVA

Condition: good (used), Year of construction: 2006, operating hours: 15,200 h, HAAS VF-2BHE CNC vertical machining center Year of construction: 2006/12 HAAS control system High pressure system-IKZ Haas filter system Spindle speed range 7500 rpm Spindle motor power 15 kW Tool holder SK40 Cjb Hbstpwrbo Ui Eogt X-axis travel 762 mm Y-axis travel 406 mm Z-axis travel 508 mm Rapid traverse 18 m/min Table size: 915 x 356 mm Renishaw TS27 tool presetter Chip auger USB connection Coolant tank

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 1097415, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, table width: 508 mm, table height: 324 mm, overall weight: 6,350 kg, spindle speed (min.): 10,000 rpm, Technical Data BRAND: Haas MODEL: MDC-500 SERIAL NUMBER: 1097415 Cgjbjtr Ufle Hb Ui Eet Year: 2012 Numerical Control: Haas Location: Tabaza (Asturias- Spain) TABLE DIMENSIONS Table surface: 508x324 mm. Number of tables: 2 Maximum weight on the table: 318 kg. RANGE Longitudinal travel X: 508 mm. Transversal travel Y: 356 mm. Vertical travel Z: 508mm. SPINDLE Cone: BT40 Spindle speed: 10.000 r.p.m. 22.4 Kw 122 Nm ATC Capacity: 24 Station Tool change time: 4.8s ADVANCES Working feeds: 21.2 m/min Rapid feeds: 25.4 m/min WEIGHT AND DIMENSIONS Machine dimensions: 3.632x3.404x2.870 mm. Machine weight: 6.350Kg. ACCESSORIES Programmable coolant Chip conveyor Renishaw T527R probe

Condition: good (used), Year of construction: 2011, operating hours: 20,962 h, Functionality: fully functional, machine/vehicle number: M342U-16103011AHAA, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,054 h, swivel angle A-axis (min.): 30 °, swivel angle A-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis simultaneous vertical machining center TECHNICAL DETAILS Travel X x Y x Z: 762 x 508 x 520 mm A-axis: 30/110° C-axis: 360° Spindle speed: 12000 rpm Control: Winmax Cebet Hr I Ro Hb Ui Ejgt Table diameter: 245 mm rapid traverse: 35,000 mm/min Spindle taper: BT40 Number of tool positions: 24 pieces MACHINE DETAILS Connected load: 26 kVA Operating voltage: 400 V, 50 Hz EQUIPMENT - 4/5-axis rotary/tilting table - Chip conveyor - Coolant tank - Spindle cooling unit - Software options as shown in the pictures

Condition: excellent (used), Year of construction: 2021, operating hours: 3,349 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 25, Equipment: documentation/manual, Machine including WH3 cell The bidder is obliged to collect the machine by 31.12.24! TECHNICAL DETAILS X-travel: 700 mm Y-travel: 420 mm Z-travel: 380 mm Csbsu T Raws Hb Ui Esgt Table dimensions: 840 x 420 mm Rapid traverse: 60 m/min Control: 3-D Control Siemens 840D solutionline Screen size: 19 inch Main spindle Max. Speed: 24,000 rpm Power: 4/20 kW Max. torque: 78 Nm Spindle interface: ISO 7388-2 J30 (BBT30 compatible) Cooling: Water cooling for spindle motor and spindle with heat exchanger Tool changer Capacity: 25 places Type: BT30 disk magazine Chip-to-chip time: 1.6 seconds MACHINE DETAILS Operating pressure: 6 bar Tank capacity: 600 liters Weight: 4030 kg Operating hours: 5,883 h Program run time: 4,653 h Spindle time: 3,349 h EQUIPMENT - Integrated direct path measuring systems for X, Y, Z - IKZ (internal cooling lubricant supply) - Blast air through spindle center - Paper belt filter with 40 bar operating pressure - Chip container with strainer basket - Full cabin cladding incl. cabin roof - Rotating viewing window - Flushing gun - Oil and emulsion mist separator - Documentation German/English Production equipment - Profibus automation interface - MPC (machine protection through rapid shutdown) - Blum efficiency package (TC-52 infrared measuring system with tool breakage monitoring) - DMG MORI IoTconnector - Lehmann dividing head, indirect measuring system, 4-fold rotary feed-through

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 750 mm, spindle speed (max.): 18,000 rpm, Machine details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANKREICH Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details x-travel 750 mm y-travel 600 mm z-travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 Cob Hb Uevcbcmsi Eogt chip conveyor JA kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDLE 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTS TROUGHT THE SPINDLE 40 BARS

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece height (max.): 520 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control system: Siemens 840D X-axis: max. 720 mm Y-axis: max. 600 mm Z-axis: max. 500 mm Distance spindle nose - table: 150 - 650 mm Diameter of the table clamping surface: Ø 600 mm Max. Table load: 500 kg Clamping grooves (number x width x pitch): 5 x 18 H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Cgob Hb Uieu Tq Hqe Ejt Max. Workpiece size: Ø 700 x 520 mm Machine accuracy (VDI / DGQ 3441) Positioning accuracy: ±0.005 mm / 300 mm Repeat accuracy: 0.005 mm Resolution of the axes: 0.001 mm Linear axis position measuring system: Heidenhain rotary encoder Position measuring system rotary axes: Heidenhain direct encoder Main spindle Type: AC motor direct drive Speed range: 20 - 15,000 rpm Torque (25% ED): max. 34 kW / 180 Nm Spindle cone: SK 40 DIN 69871 Spindle probe: Renishaw OMP 40 Tool changer Capacity: 60 tools Max. Tool diameter: 76 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool breakage detection/measurement: Renishaw NC4 "Split Laser" laser Axis drives X, Y, Z axes: Siemens AC motors B, C axes: AC motors Siemens Travel speed Rapid traverse X, Y, Z: max. 36 m/min B-axis speed: max. 25 rpm C-axis speed: max. 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system I (external) Tank capacity: 240 l Operating pressure (external): 0.9 bar Coolant system II (IKZ) Pressure: 42 bar (paper belt filter) MACHINE DETAILS Operating pressure: 6 bar Width with scraper belt chip conveyor: 3,384 mm Width without scraper belt chip conveyor: 2,407 mm Depth: 3,490 mm Max. height: 2,864 mm Control panel swivel radius: 1,380 mm Transport dimensions (L x W x H): 4,685 × 2,588 × 2,864 mm Installation dimensions (L x W x H): 4,963 x 4,665 x 3,005 mm Weight: 10,500 kg Total connected load: 35 kVA EQUIPMENT - Linear roller guides in all axes - Automatic machine switch-off (M30 Power Off) - Digital axis and spindle drives - Scraper belt chip conveyor (discharge height: 800 mm) - Chip trolley - External coolant supply - Flushing and air gun - Spindle blow-out system - Full protective cladding (without cabin roof) - Data interfaces (USB 1.1 + Fast Ethernet) - Set-up elements, adjustment screws and work area lighting - Operating instructions, circuit diagram and programming software (CD-ROM) - Operating tool - Air cooling inside/outside - Automatic side doors - AOF extraction duct