Used cNC turning and milling centers for sale (623)

Condition: ready for operation (used), Year of construction: 2015, DMG UNIVERSAL MACHINE CENTER HSC 105 Linear Year 2015 Travel : X1.050 Y800 Z 500mm Heidenhain iTnc 530 control Spindle speed 28.000rpm Ihsdpfsytpgfex Ahvsw ATC 32 HSK-A63 Table Ø900mm NC B axis -10o ~ +110o NC C axis 360 x 0.001o Electronic hand-wheel Chip conveyor Direct measuring system.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135908, turning diameter: 710 mm, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 6,000 mm, total width: 2,500 mm, overall weight: 14,000 kg, spindle diameter: 120 mm, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OPS-P 200 L, tool weight: 1,000 g, number of slots in tool magazine: 20, Equipment: chip conveyor, OKUMA MULTUS B 300 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 96 A - Connection load: 47.8 kVA - Swing diameter over bed: 710 mm - Distance between centers: 1500 mm - B-axis travel: 1550 mm, rapid traverse: 12 m/min - C-axis travel, control angle: 360°, rapid traverse: 200° - B-axis indexing angle: 0.001° - Number of tools: 1 L or M tool 25 mm, diameter: 40 mm - Rotational speed of live tools: 6000 rpm - Tool holder: HSK 63 - Including chip conveyor, coolant system, as well as tool holders as equipped on the tool changer Note: The item must be collected between 12.05. and 22.05.2026 on a binding, mutually agreed date. Ihsdpsyvrq Hsfx Ahvjw FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 151576, travel distance X-axis: 690 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,500 mm, total length: 9,500 mm, total width: 2,500 mm, overall weight: 14,500 kg, tool length: 400 mm, controller manufacturer: OKUMA, controller model: OSP-P 200 L, tool diameter: 90 mm, tool weight: 1,000 g, number of slots in tool magazine: 40, OKUMA MULTUS B 400 CNC Turning and Milling Center - Operating voltage: 400 V - Frequency: 50 Hz Ihjdpfx Ahjyvrn Ejvow - Rated current: 190 A - Connection load: 58.9 kVA - Turning diameter: up to max. 710 mm - Swing diameter over cross slide/bed: 710 mm - Y-axis travel: +115 / -115 mm - C-axis travel: 360° - B-axis travel: 225° - Main spindle chuck diameter: 340 mm - Spindle nose diameter (front bearing): 150 mm - Spindle bearing diameter: 101.6 mm - Feed rate in X/Y/Z: 0 - 1000 mm/rev - Rapid traverse X/Y/Z/W: 40/26/40/20 m/min - Rapid traverse C-axis: 200 rpm, B-axis: 30 rpm - NC tailstock (W-axis) - Taper: MK 4 - Tool holder: HSK 63 - Including chip conveyor and coolant system Note: The HSK tool holders in the tool magazine are included in the scope of delivery! Note: In 2023, the machine underwent several overhauls with a total value of EUR 34,000. Documentation available; detailed breakdown upon request! Note: Item must be picked up bindingly between 12.05. and 22.05.2026 on a date yet to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Ihjdpsv Drigofx Ahvsw Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 380 mm, turning diameter: 165 mm, spindle speed (max.): 5,000 rpm, bar passage: 51 mm, controller model: Mitsubishi MELDAS, Machine in very good condition, fully functional both electrically and mechanically! TECHNICAL DETAILS Maximum bar capacity: 51 mm Maximum turning diameter: 165 mm Maximum turning length: 380 mm Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 5,000 rpm Isdpfx Ahoyvfvbsvehw Tool turret Number of tool turrets: 2 Positions per turret: 12 Driven tools possible MACHINE DETAILS Control: Mitsubishi MELDAS Machine weight: 8,000 kg EQUIPMENT Y-axis Simultaneous machining possible High rigidity and process reliability Complete technical documentation available

Condition: good (used), Year of construction: 2005, EMCOTURN 345/II TCM "BAR": 2-axis CNC lathe, 13 kW drive power, 60-6300 rpm at the main spindle, linear guideway system, digital drive system, includes: * 12-position VDI 30 axial turret with directional logic, for up to 6 driven tools, torque 16 Nm, speed range 0-5000 rpm * C-axis * Mechanical spindle brake * TRANSMIT software for easy C-axis programming * Tailstock with quill: - Quill diameter: 60 mm Ihsdpfsyu Un Rex Ahvsw - Quill stroke: 120 mm - Morse taper MK4 - Max. quill force: 5000N * Headstock size 45 with spindle nose KK5 (DIN 55026) * Hollow clamping cylinder including draw tube * EMCO standard bar feeder interface * Coolant pump 3 bar * Fanuc 21i * Machine light for work area * Hydraulic unit * Interface for foot switch and chip conveyor * Swivel-mounted measuring equipment tray * Integrated step-down transformer for 3x230, 3x400, or 3x480 Volt - 50/60 Hz * Documentation Year of manufacture: 2005 Machine No.: R2AT3551

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Ijdox Tqkmjpfx Ahvohw Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Ihjdpfx Ahex Th Nyjvsw Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS Ihsdpfx Ahsx Thu Nevow CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Ijdsxrnwljpfx Ahvjhw Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. TOTALLY AS NEW. BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES. 8 INCH + 6 INCH STANDARD CHUCK SIZE WITH:- Ihedpfxjxrpnrs Ahvsw Y-AXIS TRAVEL +45 -45 MM - LOWER TURRET (Y2 AXIS) Y-AXIS TRAVEL +45 -45 MM - UPPER TURRET (Y1 AXIS) CHIP CONVEYOR RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF SYSTEM TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 6" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA B-206 RH SPINDLE 8" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-08) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU TOOL MONITORING SYSTEM 9 BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE - MULTI BAR MAGAZINE TYPE REMAINING BAR DISCHARGE DEVICE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AXIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 1 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE - 4,500 RPM RIGHT HAND SPINDLE - 6,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (+ - 45 MM) LOWER TURRET Y2-AXIS (+ - 45 MM) 8” + 6” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Dia. 215 MM Maximum Turning Dia. 215 MM Maximum Turning Length 620 MM Bar Capacity Left Spindle Ø 65 MM Bar Capacity Right Spindle Ø 42 MM AXIS TRAVELS Upper Turret Travel X1 190 / 90 MM Upper Turret Travel Y1 90 (± 45) MM Upper Turret Travel Z1 660 MM Lower Turret Travel X2 190 / 90 MM Lower Turret Travel Y2 90 (± 45) MM Lower Turret Travel Z2 660 MM Travel A (RH Spindle) 660 MM LEFT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed (RPM) 4,500 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM RIGHT SPINDLE Chuck Size Ø (6”) 152 MM Spindle Speed 6,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-5 Spindle Bore Ø 53 MM TURRETS - UPPER & LOWER Number of Tools (Upper & Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Diameter 32 MM Milling Shank Diameter 16 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids X1 / Y1 / Z1 20 / 12 / 40 M / MIN Lower Turret Rapids X2 / Y2 / Z2 20 / 12 / 40 M / MIN Rapid Traverse Speed - A (Right Spindle) 40 M / MIN MOTORS Spindle Motor - LH 15.0 / 11.0 KW Spindle Motor - RH 11.0 / 7.5 KW Turret Driven Tool Spindle Motor 5.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 3.0 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 3.0 KW Axis Feed Motor - (A) 2.5 KW SUPPLY 35 KVA MACHINE L 4,254 MM W 2,460 MM H 2,230 MM 8,300 KGS

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 7,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, total height: 1,635 mm, total width: 1,690 mm, overall weight: 2,600 kg, controller manufacturer: FANUC, product length (max.): 1,850 mm, number of axes: 3, This 3-axis DN SOLUTIONS Leo 1600 turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 320 mm and a turning length of 303 mm. The machine is equipped with a 6-inch main spindle chuck and offers a rapid traverse speed of 30 m/min in both X and Z axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS Leo 1600 machine we have for sale. Contact us for further details. • Main spindle chuck size: 6 inch (153 mm) • Bar capacity: 45 mm • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Main spindle torque: 72 Nm • Max turning diameter: 320 mm • Max turning length: 303 mm • Number of tool stations: 12 • Guideway type: Linear guideways • Monitor size: 10.4 inch • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 14.97 kVA • Full load current: 22.74 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Technical Specification Counter Spindle No Driven Tools Yes Isdpfx Ahoyu R Nwovjhw

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz Ihedpeyu Rn Tefx Ahvow • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment • Chip conveyor (included) Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Y axis (+/-105mm), C axis 0.001 degrees, Ihedpfsw Nwfbox Ahvew B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection Ihedpfxovzahxo Ahvjw E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Ihsdpjyuy Ensfx Ahvow Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: excellent (used), Year of construction: 2008, operating hours: 3,858 h, CNC controller: MSX-850III X-axis travel mm: 260 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 275 Ihedpfxjyuy H Ss Ahvew Upper turret Number of tool slots St .: 12 Main spindle Speed ​​spindle rpm: 4000

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 2,155 mm, total height: 2,272 mm, total width: 2,275 mm, overall weight: 12,200 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 5,879 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 LMB was manufactured in 2024. It features a maximum turning diameter of 650 mm and a turning length of 2002 mm, along with a main spindle chuck size of 21 inches (535 mm). The machine includes a rapid traverse speed of 16 m/min and a maximum spindle speed of 1500 rpm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 LMB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 2002 mm • Driven tool speed: 4000 rpm • Number of tool stations: 12 • Tool holder type: BMT75 • Guideway type: Box guideways • C-axis: Yes • Electrical connection: 380 V • Electrical supply: 3 phase Ihsdpoyuy Agjfx Ahvsw • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Chip conveyor (included) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 45,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 362 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,105 mm, total height: 2,194 mm, total width: 2,056 mm, bar diameter (max.): 166 mm, overall weight: 10,750 kg, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI Touch, product length (max.): 4,759 mm, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 5100 MB was manufactured in 2023. It features a maximum turning diameter of 650 mm and a turning length of 952 mm. The machine is equipped with a 21-inch main spindle chuck and offers a rapid traverse speed of up to 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 5100 MB turn-mill centre we have for sale. Contact us for further details. • Main spindle chuck size: 21 inch (535 mm) • Bar capacity: 166 mm • Rapid traverse X: 16 m/min • Rapid traverse Z: 20 m/min • Max rapid traverse: 20 m/min • Main spindle torque: 2957 Nm • Max turning diameter: 650 mm • Max turning length: 952 mm • Driven tools speed: 4000 rpm • Number of tool stations: 12 • Tool interface: BMT75 • Guideway type: Box guideways • Spindle bore: 117–166 mm (depending on configuration) • Coolant system: High pressure coolant through turret • Tailstock: Programmable tailstock • Tool measurement: Automatic hydraulic tool measurement • Cutting force monitoring: Yes • Thread cutting: Fixed entry point with variable speed • Additional handwheel: Yes • Automatic machine door: Yes • Electrical connection: 380 V Ihsdpfeyuywksx Ahvjw • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 61.56 kVA • Full load current: 93.53 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment • Chip conveyor: Included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine Ihsdoxb Dkyopfx Ahvow • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: used, MORI SEIKI TL-5 CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL TL-5 Ihjdpfxeyuxvlj Ahvow YEAR 1980 RETROFITTED 2016 CONTROL FAGOR 8055 I SWING OVER BED 520.0 mm SWING OVER CARRIAGE 380.0 mm MAX MACHINING DIA 280.0 mm MAX WORK LENGTH 2000.0 mm CHUCK DIA 300.0 mm SPINDLE RANGE 17 – 2000 RPM SPINDLE NOSE A2 - 8 SPINDLE BORE 75.0 mm TURRET 8 STATIONS TAILSTOCK YES PLUS RETROFITTED WITH MODERN FAGOR 8055i CONTROL. 3 SPEED GEARBOX HYDRAULIC STEADY SWARF CONVEYOR COMPLETE SET OF MANUALS FULLY WORKING ORDER

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Ihodpfxoydd H Ie Ahvow Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1999, EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Serial No.: F1D V00 Year: 1999 Ihjdpev S Tx Eefx Ahvew Control: Siemens Sinumerik 810M Technical Features: Travels (X, Y, Z): 185, 125, 200 mm Vertical travel (Z-axis): 100 mm Distance between headstock and table surface: 95-195 mm Table: 420 x 125 mm Maximum load on table: 10 kg Spindle bearing: Diameter 40 mm Taper: SK30 Tool clamping: Automatic Motor speed: 5000 rpm Speed range: 150-5000 rpm Maximum cutter diameter: 25 mm Accuracy: 0.00125 mm Number of tool stations: 10 Maximum tool diameter: 55 mm Maximum tool weight: 700 g Dimensions: 1730 x 875 x 1892 mm Weight: 570 kg All machine and numerical control manuals are included.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Ihjdpfx Asyuq Dzehvow Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 2018, controller manufacturer: Fanuc, controller model: 31i-B5, _____ Description: Year of manuf. : 2018 Control : Fanuc 31i-B5 Turning diam. : 500 mm Turning length : 1280 mm Mainspindle: Technology:Motorspindle Speed:3.000 rpm Power (max.):38 kW Torque (max.):1.014 Nm Clamping cylinder:Hollow clamping cylinder Bar capacity:94 mm Workpiececlampig:3-Jawchuck, SMW Autoblok 250BB Subspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):40 kW Torque (max.):286 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok HFK-N-210-52-3 Movement in W:1.130 mm Toolcarrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:10.000 rpm Power (max.):20 kW Torque (max.):110 Nm Taper:HSK-A63 Swivelrange in B:+/- 105° In general: Toolmagazine:Chainmagazine, 40 Stations Ihjdsyul E Hspfx Ahvew Movement in X/Y/Z:515/210/1.360 mm Rapid travers in X/Y/Z:18/18/30 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolantmanagement:Internal coolant unit with Paperbeltfilter and Highpressure, 70 bar Toolmeasurement:Automatic Measuringarm, Marposs TT30 :Rawmaterialfeeed. Interface Barloader prepared Finished part removal:Interface Partscatcher prepared Oilmistseparation:Interface mechanical prepared Toolholder:Misc. used Toolholder HSK-A63 Further Equipment:Rinsing pistol