Used CNC turning and milling centers for sale (594)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Blodpjzc Hipofx Adrei Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Bsdpfx Adjxt Uqhsrsli

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Blodpfow Hg Nlox Adroi Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Bodewztq Ejpfx Adrsli Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Bsdpfxow Rbcyo Adreli

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] Bodpfjuhamcsx Adrjli - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 48 (2x24) LOWER TURRET - Number of positions : 24 - X/Z stroke : 130,5/658 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7,1 [kW] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2700x3460 [mm] - Machine height : 2857 [mm] - Machine weight : 14500 [kg] MACHINE HOURS - Number of working hours : 11000 [h] EQUIPMENT - CNC : Fanuc 31iA-5 - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle - Chips conveyor : Droite - Spindle cooling unit - Predisposition for barfeeder - Electric transformer - Chuck 3 jaws : SCHUNK 215 / SCHUNK 165

Condition: excellent (used), Year of construction: 2013, HT 665 MC plus TCMY - FANUC Multi-axis CNC turning machine for complete machining of turning/milling parts; Integrated spindle motors (ISM) on the main and counter spindle with thermocompensation system (liquid-cooled) Drive power: Main spindle - 29 kW Counter spindle - 22 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (max. bar diameter ø 65mm) Counter spindle: KK6 Y-axis: Travel range +/- 50mm The Y-axis is designed so that the resulting cutting forces are distributed across two axes. This results in extremely high rigidity for all machining operations. Preloaded roller guides in all linear axes; digital drive system, integrated spindle encoder; State-of-the-art control technology FANUC 18i TB with Manual Guide i dialog programming. Includes: ·Draw tube cylinder including draw rod ·Part ejector and flushing through the counter spindle ·2x 12-position tool turret VDI 30 radial with direction logic for up to 2x 12 driven tool stations! Swivel speed adjustable with feed switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Torque constant 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle ·Part removal device for the finished parts ·Chip conveyor with a discharge height of Bjdjzczgvepfx Adrsli 1200mm programmable (Type "hinged belt") ·Coolant system integrated into the chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar ·Electrostatic oil mist separator ·Hydraulic unit ·Machine light ·Documentation Year of manufacture: 2013 Includes: two Hainbuch chucks, collet chuck for collets 185E plus reduction is also included.

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Blodpozczacofx Adrei Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, Bjdezcy S Rjpfx Adrsli milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, Bodpszcy Ilsfx Adrjli swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Bljdpfx Ajzcwyljdroi Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre Blsdpfezcwiyex Adrsi • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), CMZ brand CNC lathe, TX66 Y2 Quattro model, year 2012, with powered tooling on both turrets, Y-axis... Blsdpfxszcu Hij Adrei

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC Blodpfx Ajzcqx Iedrsi number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: used, Year of construction: 1995, turning diameter 250 mm turning length 750 mm Bsdozfqhyepfx Adroli control Siemens type 840 c spindle passage 65 mm Tool changer 2 live tooling 2x Revoler weight of the machine ca. 7 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2020, 2020 Vulcan TC250M CNC Turn/Mill Slant Bed Lathe With Fanuc Series Oi-TF Plus Control Auto Strong N-210 Ø250mm 3 Jaw Power Chucks. Swing Over Bed Ø600mm. Maximum Turning Ø316mm. Working Length 435mm. Spindle Bore Ø77mm. Bar Capacity Ø65mm. Axis Travel 'X'=185mm, 'Z'=490mm. Rapid Traverse 'X'=30m/min, 'Z'=30m/min. Cutting Feed Rate 0.001-500mm/rev. Speed Range 25-3,000rpm (11/15kW Motor). Spindle Nose A2-6. Driven Tool Speed Range 25-4,000rpm. Sauter 12 Position Turret, Turning Tool Shank 25 x 25mm. Internal Turning Tool Shank Ø40mm. Tailstock Travel 380mm, Quill Ø75mm, Quill Stroke 85mm, MT4 Taper. Run Hours 2,139. S/No. 25S1001 (2020). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. Bljdpfezfqfljx Adrji With Coolant System (190L Tank), Chip Conveyor, Filtermist S800 Mist Extraction Unit, Programmable Tailstock, Parts Catcher, Tool Setting Arm, Quantity Of Assorted Driven Tool Unit, Turning Tool Holders, Foot Switch, Signal Tower & Manuals. Overall Dimensions L3,160 x W1,805 x H1,935mm. Approx Weight 5,000kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: ready for operation (used), Year of construction: 2009, spindle motor power: 18,000 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, number of axes: 5, This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details. • Rapid traverse rates: • X: 30 m/min • Z: 30 m/min • Y: 10 m/min • Main spindle: • Spindle nose: A2-8 • Max bar capacity: 80 mm • Chuck: Kitagawa B-210, Ø250 mm • C-axis: 360° positioning • Sub-spindle: • Spindle nose: A2-6 • Integrated motor power: 15 kW • Chuck: Kitagawa B-208, Ø210 mm • C-axis: 360° positioning • Parts transfer capability: Yes • Milling/driven tools: • Turret capacity: 12 stations • Driven tool stations: 12 • Driven tool motor power: 5.5 kW Bjdpfxjzcp Hqo Adrjli • Max driven tool speed: 6,000 rpm • Direct drive tooling, live tool milling, off-centre machining • Turret and tooling: • Turret indexing time: 0.2 sec • Automatic tool measurement: Dual Renishaw tool measuring arms • Mechanical construction: • Guideways: Hardened box ways (prismatic) on all axes • Spindle drive: Built-in integrated motors • Transmission: Direct drive (no belts/gearboxes) • Starting torque: 640 Nm • CNC control: • Control: Mori Seiki MAPPS IV • Conversational programming, load monitoring, tool wear/consumption monitoring • Cooling and lubrication: • Main spindle oil cooler: Daikin • Sub-spindle oil cooler: Daikin • Connectivity: • USB, PCMCIA, RS-232 • Bar feeder interface: Included • Machining capabilities: • Simultaneous turning and milling • Y-axis machining • Polar coordinate interpolation • Off-centre drilling and tapping • Front and back working with sub-spindle • Complete part machining in a single setup • Complex multi-axis machining • Typical applications: • Precision turned components • Aerospace parts • Automotive components • Hydraulic components • Medical components • General precision engineering Additional equipment • LNS automatic bar feeder, 1.5 m capacity • Automatic parts catcher • Chip conveyor: Side-mounted hinge belt type • Independent chuck foot pedals (main and sub-spindle) • Electrical transformer • Documentation package: • Operation manual • Programming manual • Parts list • Electrical schematics • Tool holders: Static and driven tool holders included • Other optional equipment: Not included Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1994, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1994. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; Bljdpfxezcp Als Adroi • Number of tools: 120 (o "Tool capacity: 120") • High-pressure coolant: 40 bar • Coolant tank: 1,000 liters • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered). Bledpozcplysfx Adrei

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder Bjdjzfkgcspfx Adrjli • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. Bedpjzfkbasfx Adroli The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Bledpfezcmzxsx Adrji Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Blodpfx Adezclqljrsi Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, turning length: 1,693 mm, turning diameter over cross slide: 1,030 mm, turning diameter: 690 mm, Multicut 500iT 5-axis turning center in very good condition. (X, Z1, Z2, C, B, Y axes). The machine was installed in September 2014 and has undergone regular maintenance. It is a very powerful and highly precise machine. Spindle on: approx. 13,700 hours, spindle hours: 4,500 Main technical data: CNC Siemens 840D Swinging diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis: 370 mm Spindle bore: 106 mm Bar passage through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Milling spindle power S6 40% duty cycle: 22 kW Milling spindle tool holder: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 positions Blsdpozfhbwofx Adroi Linear scales in X, Z, Y Tailstock MK6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Accessories: Forkart chuck type 3FNC with reversible hard jaws • Chip conveyor • Internal cooling through tool, 60 bar • Coolant gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm Ø), automatic up/down movement

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 510 mm, turning diameter: 360 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, bar diameter (max.): 66 mm, CNC turning and milling center DMG MORI NLX 2000 / 500 SY Year of manufacture: 2017 Control system: Celos with Mitsubishi M 7300 Main spindle speed: 0 - 5,000 rpm Drive power: 11/15 kW Counter spindle speed: 0 - 4,500 rpm Drive power: 7.5/11 kW Bar diameter, main spindle: 66 mm Bar diameter, counter spindle: 43 mm X-axis: 260 mm Y-axis: +/- 50 mm Z-axis: 590 mm Turret: 20 stations Speed: 0 - 10,000 rpm Drive power: 3.5/5.5 kW Accessories: Blodpszfguvofx Adrei - Tool measurement system - Chip conveyor - Bar feeder LNS - Workpiece collection tray