Used beverage production for sale (1,063)

Condition: used, Year of construction: 2021, Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Bedjykz Suopfx Ab Isda

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction Evaporation chamber | Stainless steel, full inspection access Heat exchanger | AISI 316L tubular exchanger Vacuum pump | Liquid-ring system with cooling recirculation Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors Pumps | Stainless-steel centrifugal and mono volumetric discharge pump Vapor condenser | Stainless-steel surface condenser Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks Bdjdpfx Absykrdbo Ija

Condition: new, Year of construction: 2019, Filter tank / gravel filter tank made of stainless steel (V2A), unused Technical data / dimensions Available quantity: 2 Volume: approx. 21,800 liters Tank type: Pressure tank Condition: unused Suitable for food: yes Design: upright Diameter inside: approx. 2,384 mm External diameter: approx. 2,396 mm Cylindrical height: approx. 4,000 mm Total height: approx. 6,576 mm Operating pressure: Overpressure Operating pressure: 6 bar Test pressure: 8 bar Wall thickness bottom: approx. 7 mm Wall thickness top: approx. 8 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 1,114 mm Operating temperature: 35 degrees Celsius Notes: Filter tank (gravel/water) with nozzle base, Filter area: approx. 4.5 m² Material / properties Material inner casing: V2A (1.4301) Feet material: V2A (1.4301) Surface outside: Glass bead blasted Surface inside: Rolled bright (2B) Features Stand shape: Feet Number: 4 Fastening: fixed Top shelf type: Basket arch base Bottom shelf type: Basket arch shelf Bdodpoty Tidefx Ab Ija Shelf type: Basket arch shelf Top floor: 1 x flange DN 600 with hinged cover 1 x DN 150 hole in the hinged cover 2 x crane eye Jacket: 1 x flange DN 200 with internal distributor pipe with 3 inlet nozzles 1 x type plate 1 x DN 500 manhole with hinged cover 1 x flange DN 100 in the cover of the manhole flange Underbody: 1 x flange DN 600 with hinged cover 1 x flange DN 100 in the cover Internal: 1 x nozzle base with filter nozzles (filter area approx. 4.5 m²) Documentation Drawing Test certificate Other: Material certificates Manufacturer's declaration

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Bjdpfovgud Sox Ab Ioda Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Year of construction: 1992, Overview  This decrater for returnable glass bottles was manufactured in 1992 by German company KETTNER. The machine was operated until September 2025 in a returnable glass (RGB) line handling 330 ml bottles in 6×4 plastic crates at 2,500 crates per hour. It is still installed with energy disconnected, stopped since September 2025, available immediately, and can be visited on request. Technical data  Capacity: 2,500 crates/hour Formats: 330 ml bottles Plastic crates 6×4 Application: Decrating of returnable glass bottles Operating status: Stopped; energy disconnected Bjdoyi U N Rspfx Ab Ieda

Condition: used, Year of construction: 1992, Overview  This crate packer (crater) for returnable glass bottles was manufactured in 1992 by German company KETTNER. The machine was operated until September 2025 in a returnable glass (RGB) line handling 330 ml bottles in 6×4 plastic crates at 2,500 crates per hour. It is still installed with energy disconnected, stopped since September 2025, available immediately, and can be visited on request. Technical data Capacity: 2,500 crates/hour Formats: 330 ml bottles Plastic crates 6×4 Application: Crating of returnable glass bottles Operating status: Stopped; energy disconnected Bdodpfx Aeyi U Hveb Isa

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer Bjdpfeycwvaox Ab Ijda 5. Conveyor system 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Bdjdpfx Abeyi Aywj Iea

Condition: used, Year of construction: 2012, Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h Bedpfxeyi Alme Ab Isda

Condition: used, Year of construction: 2011, Overview  This continuous beverage mixer was manufactured in 2011 by German company KHS. The INNOPRO PARAMIX C+ is designed for inline mixing in beverage production. The machine is still installed with energy disconnected and is available immediately. Technical data  Capacity: 6,500 – 19,000 L/h (finished product); up to 16,500 L/h (line reference) Formats: 330 ml (line reference) Application: Inline beverage mixing Configuration: Continuous mixing system for water, syrup and CO₂ Mixing ratio: 1:3 to 1:9 Measurement and control systems: CO₂ measurement and regulation Brix measurement and regulation Mass flow meter for total CO₂ consumption measurement (instead of vortex meter) Instrumentation: Maselli Brix and CO₂ measurement system Residual oxygen after degassing: < 0.3 ppm (depending on maintenance condition) Dimensions: approx. 570 × 230 × 235 cm   Bdodpfx Aoyiz D Isb Iea

Condition: used, Year of construction: 2012, Overview  This level & cap inspection machine was manufactured in 2012 by German company HEUFT. The SPECTRUM is designed for quality control of filled bottles, inspecting fill level and closure. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. Technical data  Capacity: Up to 43,000 bph Formats: 330 ml Application: Level & cap inspection on filled bottles Flow direction: Left to right Operating hours: 48,121 h Bedeyizzmopfx Ab Isda

Condition: used, Year of construction: 1992, Overview  This depalletizer and palletizer system for returnable glass bottles in plastic crates was manufactured in 1992 by German company KETTNER. The system was operated in a returnable glass (RGB) line for 330 ml bottles running at 43,000 bph until September 2025. It is still installed with energy disconnected, stopped since September 2025, and available immediately. Visits are possible on request. Technical data  Capacity: Up to 60 pallets/hour Application: Returnable glass bottles (RGB) in plastic crates Formats: 330 ml Operating status: Stopped; energy disconnected Scope of Delivery  KETTNER depalletizer KETTNER palletizer Platforms ROBOPAC stretch wrapper Bsdpfxeyizxfj Ab Ijda

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. Bedpfxsxm Rmxs Ab Isda The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. The machines have seen little use since 2019 and remain in good condition.

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, machine/vehicle number: N/A, Equipment: head guard, A robust capper for applying roll-on-pilfer-proof (ROPP) caps to bottles Bodex E S Nujpfx Ab Isda Capacity: 400-600 bottles per hour, depending on operator Benchtop operation 4 roller stainless steel capping head Heads can be changed on the machine to allow the application of different sizes of cap with the same machine Stainless steel frame and case Dual push-button safe operation

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Bdsdpfoyigigsx Ab Iea

Condition: used, Year of construction: 2012, Overview  This isobarometric bottle filler was manufactured in 2012 by German company KRONES. The MODULFILL ISO is equipped with 144 filling valves and 24 closing heads (pitch 95 mm). The machine was operated on 330 ml bottles at 43,200 bph and is designed for up to 50,000 bph on this format. The filler is still installed with energy disconnected, stopped since September 2025, and can be visited on request. The machine has 48,121 operating hours. Regular maintenance was performed (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: 43,200 bph on 330 ml (designed up to 50,000 bph) Formats: 330 ml Filling type: Isobarometric Neck finish: Crown / Twist-off Configuration: 144 filling valves 24 closing heads Pitch: 95 mm Operating hours: 48,121 h Dimensions: approx. 12 m × 8 m Bodpfx Abjyigh As Ieda

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features Equipment Type: Barrel support cradles / sleepers for wineries Design: V-shaped structure for secure barrel positioning Barrel Capacity: 2 barrels per support Compatible Barrel Sizes: 225 to 700 liters Manufacturing Process: Robotic MAG continuous wire welding Structural Strength: High resistance to load, handling, and mechanical stress Surface Finish: Oven-cured polyester powder coating Compatibility: Suitable for automated barrel washing systems Application: Wine cellar barrel storage and handling Quantity: 488 units Dimensions (Standard 225 L Barrel Support) Length: 1,430 mm Width: 610 mm Height: 364 mm Bdjdoyiamrepfx Ab Iea

Condition: used, Year of construction: 2006, Overview  This glass bottle depalletizer was manufactured in 2006 by Italian company MAS PACK. The machine is currently in production until end of July 2026 and forms part of a wine bottling line. Visits are possible on request. The machine is well maintained. Technical data  Capacity: Up to 7,200 bph Application: Glass bottles Formats: 37.5 cl Bourgogne 75 cl Bourgogne 1.5 L Magnum Power supply: 5 kW Air supply: 150 L/min Bjdpfxjyiak Rj Ab Ioda

Condition: used, Year of construction: 2001, Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure type: MCA aluminum screw cap closure size: 28 x 15 mm formats: 1.0 L VdF 0.5 L VdF bottle diameter: 89.5 mm production capacity: 7,000 bph direction of rotation: clockwise, l-r automatic speed regulation CIP tank for automatic cleaning closure control: cap feed control cap presence/closure control safety protections machine dimensions: width: 3.40 m height: 2.60 m depth: 2.30 m Bsdjyh Iraepfx Ab Ieda

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND Bdjdpfsya Nf Iox Ab Iea 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  Capacity (beverage volume): 6.000 - 36.000 l/h Dosing rate: up to 20 ml Velcorin / hl Flow meter Endress + Hauser Further details against request.  Bdedpfx Aoyhpdaob Iea

Condition: used, Year of construction: 2002, The Velcorin dosing system was developed by Lanxess for beverage preparation. The system has a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. The system has already been dismantled and is ready for collection.  Technical details  Capacity (beverage volume): 6.000 - 36.000 l/h Dosing rate: up to 20 ml Velcorin / hl Flow meter Endress + Hauser Further details against request.  Bdjdoyhn Siopfx Ab Ioa

Condition: used, Year of construction: 2017, Overview  This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery  Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL Bdedpfx Aoyhm D Rob Isa

Condition: used, Year of construction: 2019, This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates Bedpfsyhmzpex Ab Ieda

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll year of manufacture: 2008 labelling applicators: 2 (wet-glue heads) operation Direction: Right-machine, parallel on one side of the machine production Capacity: 45.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Bdsdpoyhgqqsfx Ab Isa