Used Cartridge Dust Collector for sale (5,438)

Condition: used, Used industrial dust extraction system, complete with a Dynair 7.5 kW fan, electrical control panel, and filtration unit. Iodez Rpltspfx Ahyobc No disassembly required. Available immediately. Complete system as shown in the picture. Located in Rotterdam, the Netherlands. Delivery: EXW Rotterdam. Worldwide inquiries are welcome. Additional information and photographs are available upon request.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. Ibsdpsvg U Dxefx Ahysc -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Ibedpfsk Ea Uuex Ahyoc

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Manufacturer: Dongguan Jieba Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Airflow : 1300 m3/h Iodpfoxfkuyox Ahyebc Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: new, WAM FLO dust collector, extraction filter unit, filter, extraction system New Fan motor power: 3 kW, 3000 rpm Filter area: 22 m2 Equipped with electro-pneumatically cleaned filter cartridges Stainless steel 304 Zero dust emission Iedpfxewyf Aqo Ahyjbc 5 units in stock See our other listings VMA Wekerom

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg Ibjdpfevzqtxsx Ahyec

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Ibjdpjv Sk Tmsfx Ahysc Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Ibsdpfxjryxmxe Ahysc Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg Ibjdpfx Ajvu Aqpehyec

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 Dust Collector is an industrial dust extraction system designed for efficient and reliable removal of sawdust and wood chips in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key Features Powerful 3.8 kW motor (400 V) – ensures reliable, continuous industrial operation. Airflow capacity of 4,860 m³/h – efficiently extracts large quantities of sawdust and wood chips. Metal sawdust extraction fan – durable steel impeller provides quiet, vibration-free operation. Heavy-duty steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise machine positioning even on uneven surfaces. Six collection bags (200 L each) – increased waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps allow fast, tool-free bag removal. Connection for up to four machines – extraction manifold with 1 × Ø180 mm and 4 × Ø100 mm ports provides flexible installation options. Construction and Technology The FM350 is equipped with a robust steel extraction fan and a reinforced frame designed for intensive industrial use. High-quality components ensure durability, overload resistance, and reliable operation during continuous production. The modern bag mounting system allows quick and convenient maintenance, while the powder-coated steel housing provides additional protection against wear and harsh workshop conditions. Precision and Performance Thanks to its large filter surface area and high suction pressure, the CORMAK FM350 dust collector provides excellent working conditions even during intensive woodworking operations. Efficient dust separation helps maintain cleaner air, improves workplace comfort, and increases operator safety. Applications The FM350 is ideal for: Wood processing plants – extraction of chips and dust from saws, planers, and milling machines. Professional woodworking workshops – suitable for multi-station operation. Technical schools and educational workshops – efficient dust extraction for training environments. Large industrial halls – where a high-capacity sawdust extraction system is required. Ibodpsvu Rx Iefx Ahysc Standard Equipment 3 fabric filter bags 3 fabric waste collection bags Extraction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional Equipment Galvanized hose clamps 3-micron filter cartridge insert Technical Specifications Specification Value Airflow capacity 4,860 m³/h Collection bag capacity 3 × 200 L Number of bags 6 Extraction inlets 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 2,355 × 590 × 2,150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Ibedpfjhk Dfrex Ahyjc Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Ibodpfszdddyox Ahyec Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Condition: used, Year of construction: 2022, Operational units. Multiple available. Ask for spec and quotation! Ibsdjyi Uzajpfx Ahyjc

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Iedpfx Ahex A Exusysbc Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 Ijdpfx Ahomzat Heysbc -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes -Accessories: Control -Condition: Used-good -Price: On demand

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Ibsdpfx Ahjvu Artjyec Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA Dust Collector is an advanced industrial dust extraction system designed for intensive operation in woodworking shops, industrial facilities, and furniture manufacturing plants. Combining an impressive 3,900 m³/h extraction capacity, robust construction, and excellent suction performance, the FM300SA is built for demanding environments requiring reliable, continuous operation with large volumes of waste material. Equipped with four fabric filter bags and a WhirlWind series multi-blade metal impeller, the FM300SA provides efficient dust separation, stable airflow, and long-lasting performance in professional production environments. Key Features 2.2 kW / 400 V motor – ensures stable and efficient industrial operation. Extraction capacity of 3,900 m³/h – enables effective dust removal from multiple workstations simultaneously. WhirlWind multi-channel metal impeller – dynamically balanced for high efficiency, quiet operation, and vibration-free performance. Four fabric filter bags – provide an increased filtration area for longer operation with fewer interruptions. Reinforced steel construction with additional support brackets – ensures excellent stability and durability under heavy loads. Quick-release bag mounting system – allows convenient, tool-free bag replacement. Four-point sealing system – improves overall system tightness and maintains maximum suction efficiency. Mobile base with bearing-mounted wheels – enables easy movement around production halls and workshops. Construction and Technology The heart of the FM300SA is a precisely balanced WhirlWind multi-blade metal fan, designed to generate powerful and consistent suction pressure. The construction has been engineered for intensive industrial use, with reinforced supports and a double load-bearing structure ensuring maximum stability even when the collection bags are fully loaded. All critical connection points are fitted with flexible seals to improve airtightness and minimize suction losses. The multi-bag filtration system efficiently separates extracted air from sawdust and wood waste, ensuring reliable dust collection performance. Precision and Performance The CORMAK FM300SA chip extractor allows simultaneous operation with multiple woodworking machines thanks to its flexible extraction configuration: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets Ibjdpfx Aevu A Dijhyjc The four fabric filter bags provide a total capacity of 220 litres, reducing the frequency of emptying and improving production continuity. The unit operates smoothly, quietly, and with minimal vibration, contributing to improved operator comfort and efficient dust control. Standard Equipment 4 fabric filter bags Mobile metal base with bearing-mounted wheels Optional Equipment Galvanized hose clamps for extraction hose installation Cartridge filter with filtration efficiency down to 2 microns Technical Specifications Specification Value Extraction capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Filter bag capacity 220 L Number of bags 4 × fabric filter bags Extraction inlet 1 × Ø150 mm / 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 2,250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual CE Declaration of Conformity Yes

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021 Ijdezq A Ezjpfx Ahyjbc

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard Iedpfx Aegyfmaehyobc • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Manufacturer CORAL S.p.A. (Italy) Model POLIVAL 2 ADPE Technical Specifications Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Ibjdpfx Ahszh H Ubeysc Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Condition: excellent (used), Ref. 60) Dust Collector N° 3 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ibsdpszx Eirsfx Ahyjc Ref. 61) Dust Collector N° 4 “RDL” (with fan HP 125) 12’ x 40’ (mm 305 x 1015) Ref. 62) Dust Collector N° 5 “RDL” (with fan HP 100) 12’ x 40’ (mm 305 x 1015) Ref. 63) Dust Collector N° 6 “Concept Air” (with fan HP 30) 6’ x 20’ (mm 152,5 x 508)

Condition: excellent (used), a) Ref. VAC-1) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 150) - Total air flow rate: 40,000 CFM (67,960 m³/h) b) Ref. VAC-2) Saw-Dust Collecting System “AIREX” (with fan - motor power HP 250) Ibodozx Eiljpfx Ahyec - Total air flow rate: 60,000 CFM (101,940 m³/h)

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Ibodpfx Ahsxbf Rboyjc Motor: 5.5 kW Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: reconditioned (used), Rated motor power 2.2kW/5.2A Rated voltage 380V / 50Hz / ~3Ph Rated volume flow 1350 m³/h Ibjdpfx Ajv Azcyshyoc Rated negative pressure 2850 PA Main switch + start and stop Manual filter cleaning Suction nozzle 140 mm 1 container diameter 800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 150 m², input voltage: 380 V, volume flow: 20,000 m³/h, total width: 2,450 mm, total length: 2,400 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 78 dB, Equipment: documentation/manual, BAG FILTER – SELF-CLEANING Airflow rate: max 20,000 m³/h Dimensions: 2400 x 2450 x h 8500 mm Filter area: 150 m² Filter fabric: antistatic, 500 g/m² Cleaning system: Pulse-jet with control unit/sequencer; manual/automatic operation No. 02 explosion-proof ventilation panels – ATEX, in a horizontal structure Conical hopper for free-fall of filtered dust and discharge via motorized rotary valve, 0.75 kW Ibodpjz Nm Snsfx Ahyec Dust discharge system designed for collection in big-bag sacks. Electrical panel with star/delta starter, 22 kW Fan, 22 kW