HSD cutting nozzles, 22 pieces

Zinser HSD 6 - 10 mm Acetylen 5 bar

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. Dodevi Hryepfx Ab Tjla turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Dedpfx Abofw Ah Rs Tjla Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Condition: used, Year of construction: 2025, faceplate diameter 3.000 mm swing diameter 4.000 mm turning height 2.500 mm Control Fanuc 0i-T max. workpiece weight 30.000 kg table: table diameter 3.000 mm table speeds 1 - 100 1/min power capacity - table 60/75 kW C - Axis: Working speed 0 - 180 °/min max. table speed 0,5 1/min turret slide: Shank diameter 50 mm spindle cone ISO 7/24 No.50 Spindlespeed 15 - 1.500 min/-1 power capacity - Tool Spindle 22 / 26 kW ram cross section 300 mm axis stroke: x-axis 2.335 mm z-axis 1.600 mm cross rail adjustment 2.000 mm Tool-Presetter: tool taper MAS BT 50 number of toolpositions 24 (2x12) pos. max. tool weight 90 kg draw bolt DIN.69872 feeds: rapid feed (X / Z) 8 m/min rapid traverse of the crossrail 500 mm/min total power requirement - kW weight of the machine ca. 95 t dimensions of the machine ca. 14,0 x 7,4 x 9,0 m Vertical Turret Lathe - Double Column HANKOOK - VTC 3040 E - NEWMACHINE - price delivered, installed Germany / Europe - Delivery time approx. 14 months - Automatic Tool Changer - 12 turning / 12 milling - Geared box X,Z-axis - Safety system for overload - Hydraulic unit & Coolant system - Auto. Lubrication system for slide way - Lubrication oil cooler - Through tool coolant - NC power off Dledpfovp Sckjx Ab Tja - Splash guard - X-axis slide way protect steel cover - Safety guard rail - Work light & Patrol lamp - Leveling blocks - Foundation bolts and nuts - Tool box with maintenance tools - C-axis scale

Condition: new, Year of construction: 2025, Semi-automatic sawing sequence with workpiece clamping-sawing-raising to set height after cutting is complete Stepless hydraulic cutting pressure and feed monitoring on the saw blade back. This ensures optimum conditions for every sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts The machine control system complies with CE standard 89/289 Dledst D Azcopfx Ab Tja Technical data: Cutting range in mm round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 45° 300/300 x 300 Rapid traverse lowering of the saw frame via pushbutton to material edge Manual miter adjustment from 45°-90° - 30°, infinitely variable according to scale The miter pivot point is the intersection point between the saw blade and fixed clamping jaw, therefore no change in the length dimension when changing the angle position Hydraulic full-stroke workpiece clamping - CETOP hydraulic system The material is clamped in parallel at 90° for every angular position of the saw frame Complete coolant system with electric immersion pump Central machine operation Saw blade drive with limit switch Movable band guide arm, adjustment to material width Saw band deflection roller carbide guide Rotating chip cleaning brush Saw blade tensioning with torque wrench Paintwork silver-grey/ blue-grey (RAL 7001/ RAL 7031) Remaining piece length: 60mm Cutting speed: AC frequency-controlled drive 15-150 m/min infinitely variable on the control panel Drive unit Saw band 3,0kW ; 400V, 50Hz Hydraulics 1.1kW Coolant pump 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without set-up elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Year of construction: 1997, condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm Djdpfoha Hdhox Ab Tsla weight: 3.100 kg

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, total length: 6,500 mm, total width: 1,500 mm, total height: 1,500 mm, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, The PORĘBA TPK 80 x 4000 universal lathe was professionally overhauled and modernized in our workshop in 2020. Due to internal restructuring at the customer, we bought the machine back from the customer in November 2024 and comprehensively revitalized it. The machine is now in perfect technical and optical condition. We provide a 3-month warranty on the machine (material, spare parts and electric). Technical parameters: Turning length: 4,000 mm Turning diameter over bed: 800 mm Turning diameter over slide: 530 mm Spindle hole diameter: 95 mm Drive on the upper slide drawer for taper turning Max. workpiece weight between centers: 6,000 kg Max. workpiece weight with 1 optional steady rest: 7,500 kg Max. workpiece weight with 2 optional steady rests: 9,000 kg Equipment: Tailstock, cooling pump, Following additional accessories are included: - Digital Read Out 3 axes with display - Steady rest, Ø 0-400 mm, with rollers - 4-jaw chuck 800 mm, BISON - Universal Multifix Tool Holder Dljdpfx Abjvlw Dxj Tsa

Year of construction: 1990, condition: used, cutting diameter 420 mm saw band length 4800 mm table height 600 mm total power requirement 3,8 kW Dedpfxjl Ichne Ab Tela weight of the machine ca. 1,3 t dimensions of the machine ca. 2500 x 1200 x 1600 mm

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Dlsdpfx Aogfcnkjb Toa -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Dedpfx Abot Hwq De Tjla Please ask for further details.

Condition: new, thread dia. M6 - M22 mm 60/200 U/min. 105 Nm air pressure 6 - 8 bar Dsdpjfg U Skofx Ab Tela working area 400 - 2000 mm