Modular milling cutter hob 23 pieces

Fette JAL Aufnahme 16/22/27 mm

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH Gjdswhkdcopfx Agbsbg

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz Gjdpfx Agjrtd Uwobebg - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled Gbsdpfeqfcviox Agbsg - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: Gbsdpfxeiw Dlke Agbeg - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm Gsdofqicxepfx Agbjbg longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: used, different types available Gsdpfedc A Sbox Agbebg

Condition: new, tire size: 315/80R22.5, Equipment: ABS, 🇮🇹SEM. MENCI SA700G TIPPER BODY - CHASSIS TYPE: SA700G - AXLE BRAND: ROR - DRUM ETO - AXLE CONFIGURATION: 1 STEERING AXLE + 2 FIXED AXLES - DISC BRAKES - BRAKING SYSTEM: KNORR, 2 SENSORS / 2 CHANNELS, LIFTING 1 AXLE - WHEELBASE: 1310 mm - STANDARD LANDING LEGS - CHASSIS COLOR: MENCI METALLIC GRAY - MANUAL UNDER-RUN BAR - PENTA HYDRAULIC CYLINDER - BODY TYPE: ROUND Gbodpfovzh T Nsx Agbog - BODY MATERIAL: STEEL - BODY LENGTH: 7450 mm - BODY HEIGHT: 1840 mm - REAR DOOR: TYPE B, 20-DEGREE INCLINE - BODY CAPACITY: 30m³ - FLOOR THICKNESS: 5.5 mm HB 500 - SIDE WALL THICKNESS: 3.5 mm HB 500 - FRONT WALL THICKNESS: 4 mm HB 500 - DOOR THICKNESS: 4 mm HB 500 - HYDRAULIC DOOR OPENING - HYDRAULIC DOG RELEASE - 2 SAFETY LOCKS BODY COLOR: IVECO WHITE IC194 SIDE STRIPES COLOR: BLUE RAL 5010 DOOR WITHOUT SEAL TMPS BRAND: KNORR REAR LIGHTS: EUROPOINT III - N. 10 SPEEDLINE DISCS 22.5 x 9.00, BOLT HOLE D. 26 - N. 10 TYRES: GY 315/80R22.5KMAXSG2 VIBRATOR PRE-SETTING STAINLESS STEEL TOOLBOX 400x300x450 mm STANDARD MANOMETER 2 TOW HOOKS RAPID DUMP WITH BUTTON CRAMARO ELECTRIC SHEET SYSTEM, TYPE C REMOTE-CONTROLLED SHEET SYSTEM: YES COLOR: BLUE RAL5010 BOW HEIGHT: 500 mm ROLLER HOOKS POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING AT SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY: 8:30/19:00 SATURDAY: 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer – Refrigerated Tip-Trailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 axle – Rear 4 Axle – Tway-T-Way-540- 460 HP – Xway-X-Way– Three-Way Tipper – V8 – Scania – Frost Edition Curtain Side – Box Body – Loader Sideboard – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl accepts no responsibility for any discrepancies in technical equipment, optional features, or specifications which may, in some cases, differ from those described. Please verify the features of the specific vehicle.

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Gbjdpfxeixntws Agbsg Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Gsdpfx Aofw Ah Rsgbjbg Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Gsdpsd Il A Nefx Agbjbg max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m