Surface Grinding Machine

Ziersch GmbH ZT 820

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 400 mm table-size 1.100 x 500 mm max. table load 1.000 kg dist. center of grinding spindle - table 600 mm table travel longitudinal 1400 mm table travel cross 550 mm table feed 1 - 30 m/min turning speed range - grinding wheel 1.000 - 3.000 U/min power capacity - grinding motor 11,0 kW grinding wheel size 400 x 80 x 127 mm magnetic clamping plate 1000 x 500 mm dressing device Tischabrichter voltage 400 V total power requirement 21 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 4,30 x 2,95 x 2,55 m band filter unit 1,80 x 1,30 x 0,80 m hydraulic power unit 0,90 x 0,75 x 0,95 m suction device 1,10 x 0,60 x 0,70 m - Serial-No.: Spindle ON: 11.742 hours - autom. vertical feed - table dresser with compensation Gjdpfx Acjya Ihhswebk - electr. hand wheel - paper band filter unit with magn. separator - coolant mist extraction unit

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,439 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, controller manufacturer: FANUC, controller model: 31i-WB, product length (max.): 2,900 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. • Work area / travels: • U-axis: 200 mm • V-axis: 200 mm • Rapid traverse rates: Gsdpfx Acsx Nr N Ajwobk • X-axis: 2000 mm/min • Y-axis: 2000 mm/min • Z-axis: 900 mm/min • U-axis: 450 mm/min • V-axis: 450 mm/min • Workpiece capacity: • Maximum workpiece dimensions: 1250 × 975 × 300 mm • Maximum workpiece weight: 3000 kg • Wire EDM parameters: • Maximum wire weight: 16 kg • Maximum taper angle: ±30° / 150 mm • Minimum positioning increment: 0.0001 mm • Machine data: • Permissible workpiece mass: 3000 kg • Electrical data: • Power supply: 3-phase, 50/60 Hz • Connected load: 13 kVA

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm Gbjdpfxeu R Urho Acwjk - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, MAZAK QUICK TURN NEXUS 350-II MY x 1500 Gbodpeya Du Rsfx Acwjk Max. swing diameter: 750 mm Max. machining diameter: 420 mm Max. machining length: 1,539 mm Max. milling speed: 4,500 rpm Max. spindle speed: 3,300 rpm Max. bar diameter: 102 mm Machine equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-212, diameter 304 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Hydraulic SMW steady rest - Main spindle with 102 mm bar capacity - Reinforced coolant pump - Chip conveyor, side discharge - 8 fixed tool holders - 2 driven tool holders

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Gbodpfxoxn Axce Acwsk

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Gbjdpfx Acow U Ry Njwsk Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Godpfx Aou Rqynocwsbk Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Gbedpfx Acox I Rtkswsk Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Gbedpfxjwm Rqas Acwsk Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Gjdpfxswbuyzo Acwjbk