Cutting and Winding Machine

Olbricht

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Cedpjyx Uy Aefx Afgohc Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Chjdpoxaxr Nefx Afgoc

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Csdpfx Askkiwxofgshc

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) Cjdpoyant Refx Afgjhc – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: good (used), For 1 cart Cjdewcfqaepfx Afgehc Max. temperature 400ºC Gas operation. FLAXMER burner Cart dimensions: 600 x 800 mm. Height 1800 mm (15 trays) Included 3 carts

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF Chsdpfx Asy Iplfefgjc 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Year of construction: 1993, condition: used, functionality: fully functional, machine/vehicle number: 8839, Rewinding machine for surface-sensitive materials such as papers between 30 and 300 g/m², films, etc. Working width max. 1800 mm, 2 rewinding stations for cores with 50 mm diameter. Cedpfx Afjttg E Ijgshc Attention: the second (rear) unwind visible in the video is not for sale, only the shaftless (front) unwind. For further details see attached PDF file.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Chodpfeygikwex Afgec Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Chjdpfovripyex Afgec

Year of construction: 2018, condition: good (used), Fully automatic angle welder / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left when facing the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height, infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230 V AC, 50 Hz, 1 phase + N + PE Power consumption: 3.5 kW Chjdpfx Aotzcd Sefgec Rated current: 10 A With cable and 16 A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 51026ä