YEAR-CHANCE YC-C 220S

YEAR-CHANCE YC-C 220S

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Ksdpfx Aey Hmfyeh Eedt Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Kdjdpfxsx Nr R He Ah Eet • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2015, Technical details: closing pressure: 6600 kN weight of the machine ca.: 45,5 t Kedpfx Ajw I E R Neh Eodt

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW Kjdpex Nr Uxofx Ah Esdt • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Kodpfeyc Ewxex Ah Ejdt Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2015, operating hours: 55,201 h, functionality: fully functional, screw diameter: 70 mm, Technical advantages for the machine: Kedpfx Aoxfbdxsh Esdt - high performance and precision, - fully electric and energy-efficient, - rapid, dynamic, and highly precise movements thanks to a five-point toggle clamping system with low-friction platen guidance on precision linear bearings, - efficient injection unit ensures ultra-fast injection, - complete service documentation and operating manual, - maximum energy efficiency through the consistent use of high-efficiency servo drive technology.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Kjdpfx Aezqbk Neh Ejdt

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Kjdpfxjzhudkj Ah Esdt

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Ksdeznll Sspfx Ah Eodt

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Kodszqdagepfx Ah Eedt Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.