Tool milling machine

XYZ Machine Tools 560 Mini Mill VMC

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Lredpeviq U Eefx Apvsl Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Ljdpfx Aewxmb Ejpvorl Inspection: possible upon arrangement. Delivery time: immediate.

Condition: good (used), Year of construction: 2001, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table length: 3,800 mm, table width: 1,000 mm, table load: 30,000 kg, Chip conveyor Double doors front side Chain Tool chnager 30 positions Central lubrication IKZ 16 Bar and 2,2 kW Flow 16L/Min Tool blocking power 1968 daN Ledpfxexc Hh Ds Apvorl Full set books and 1e owner machine X-Axis: 3200mm Y-Axis: 1200mm Z-Axis: 1460mm Table Length: 3800mm Table Width: 1000mm Table load: 30000 Power on spindle: 41kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 10659H Length: 8820mm Width: 6250mm Height: 3910mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. Ledpox D I Hkefx Apverl • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Lrjdpfsuzbayox Apvjl Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 Lredpfsvwgmgox Apvsl spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Lodpfxox R Duao Apvsrl

Condition: good (used), Year of construction: 2006, X 1000 mm , Y 600 mm Lrjdpfx Asu Dmy Dopvsl Parts shown by hand not come.

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Lsdpfx Ajxrcahspverl Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: excellent (used), Year of construction: 1993, Behringer sawing machine, type: HBP 530 A Lrodpfx Asw Iwrxepvsl