Machining center

MIKRON VCP 800 W

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 9,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine. Bsdpfxjyglh Ej Ahvocw • Tool interface: HSK-A63 • Tool magazine: 30 positions Additional equipment • Chip conveyor • Complete set of tool holders and tools (as shown in photos) • BILZ ThermoGrip shrink-fit system with CoolDown (induction device for mounting/dismounting tools in shrink-fit holders; manufacturer: BILZ)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg Bcedpfx Aewycmmshvow

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: EKN7528, cooling capacity: 714.5 kW (971.45 HP), type of cooling: water, total width: 2,300 mm, total length: 7,050 mm, total height: 2,500 mm, Equipment: compressor, Used Trane RTAC 200 air cooled water chiller on R134A. Complete with Trane CHHP0N2TKE0N134A semi-hermetic screw compressor, condenser with 14 fans that produce a total airflow of 185.400 m³/h, shell and tube as evaporator, braced heat exchanger and a control panel with a Trane Adaptive controller. Bjdorlk E Tspfx Ahvocw

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately. Bcsdpfx Ahjwclkyevow

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm Bcodpfx Ajwbi A Dehvow z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets Bodpfxeq Iivao Ahvocw - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port Bodpjxyauljfx Ahvecw year of manufacture 2012 8-inch chuck Spindle bore 65mm Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Bedewuurwepfx Ahvecw Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control FANUC 18i-MB Bjdsuy S Hbjpfx Ahvjcw Coolant through spindle misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Bcedpfx Ahox Rn Udsvjw Complete hydraulics/control cabinets