Duroplast injection molding machine
WITTMANN Battenfeld SmartPower 210

Name: WITTMANN Battenfeld SmartPower 210
Brand: WITTMANN Battenfeld
Price: 35000 EUR
Availability: InStock

Fixed price plus VAT

€35,000

Condition

Used

Location

Borken

Duroplast injection molding machine WITTMANN Battenfeld SmartPower 210

Machine data

Machine type:: Duroplast injection molding machine

Manufacturer:: WITTMANN Battenfeld

Model:: SmartPower 210

Condition:: excellent (used)

Price & Location

Fixed price plus VAT

€35,000

Location:: Einsteinstraße 8A, 46325 Borken, Deutschland

Call

Details about the offer

Listing ID:: A22139467

Reference number:: 21390

Update:: 17.06.2026

Description

Wittmann Battenfeld
Type: SmartPower 210
Wittmann Battenfeld injection molding machine with UNILOG B8 control
For use with thermoset materials
Current software version: IO4.26
The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026.
In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC).
The parts for the mold internal pressure switch upgrade are included in the scope of supply.
Injection molding machine:
Series: SmartPower
Machine type: 210/1330
Control type: UNILOG B8
Machine number: 137949-100
Machine weight, gross/net
Chedpfx Aozdywnei Nja
Main dimensions of the machine
Noise level (DIN EN ISO 3744-46): 65 dB(A)
Ambient temperature: +15 - +40°C (+59 - +104°F)
Year of manufacture: 2017
Operating hours: 1437 hours
Hydraulic system:
Hydraulic oil, tank capacity
Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F)
Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F)
Switching temperature for oil cooling (HLP 32): 35°C (95°F)
Switching temperature for oil cooling (HLP 46): 45°C (113°F)
Electrical system:
Drive power, hydraulic pump: 37kW
Motor voltage
Frequency
Water system:
Oil cooler:
Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd)
Cooling water inlet max. 35°C (95°F), NW ⅜"
Cooling water battery:
Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi)
Cooling water outlet ∅ ¾"
Number of heating zones including nozzle: 5
Closing unit: SmartPower 210
Clamping force: 2100kN
Type: SmartPower 210
Condition: used
Scope of supply: (See image)
(Changes and errors in the technical data and information are subject to change!)
We will be happy to answer any further questions you may have by telephone.

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2012

610 listings online

Call

Send inquiry

Telephone & Fax

+49 2861 ... show

Fax:

These listings may also fit your interest.

Auction

Injection molding machine WITTMANN Battenfeld SmartPower 210/1330 Unilog B8

Nordrhein-Westfalen

18,515 km

Injection molding machine
WITTMANN BattenfeldSmartPower 210/1330 Unilog B8

Details

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Chjdsyi Ailopfx Ai Nsa Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

See details

Listing

Hurco CNC TMX 8 MYSi Hurco CNC TMX 8 MYSi

Germany

18,654 km

Hurco CNC TMX 8 MYSi
HurcoCNC TMX 8 MYSi

Call

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A • Max ambient temperature: 35 °C Cedpfeym T Itex Ai Nsha • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

See details

Listing

Injection moulding machines ENGEL Victory 50-200 Spex

Hattingen

18,536 km

Injection moulding machines
ENGELVictory 50-200 Spex

Call

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Chjdpjxzq Skefx Ai Noa Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

See details

Listing

Glass cutting table Schneidelinie für Geteilte Bandmaße Bystronic

Pleystein

18,362 km

Glass cutting table
Schneidelinie für Geteilte BandmaßeBystronic

Call

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions Cjdpet Et Icjfx Ai Noha o Serial No. E980016-4

See details

Listing

Fuente de Cantos

19,724 km

Centerless Grinder
ESTARTA327

Call

Condition: used, Grinding wheel dimensions (od x id x width) Ø 650 x Ø 304.8 x 500mm Min/max diameter to be ground 3 / 200 mm Width of regulating wheel 500 mm Number of regulating wheel speeds Infinite Csdpfxsix N Enj Ai Noha Min/max speed of regulating wheel (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Automatic longitudinal, manual penetration for both wheels Diamond dressing speed 255 r.p.m. Number of CNC axes 1 Regulating wheel dimensions (od x id x width) Ø 350 x Ø 203.2 x 500mm Width of grinding wheel 500 mm Maximum length to be ground in plunge grinding 500 mm Power of grinding wheel head motor 55 Kw Power of hydraulic motor 3 Kw Total power 60 Kw Voltage 220/380V Length 2,300 mm Width 2,800 mm Height 2,100 mm Weight 15,000 Kg

See details

Listing

Rolling and Foiling machine Schüco Isomat 4

Germany

18,384 km

Rolling and Foiling machine
SchücoIsomat 4

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Chjdpfx Aswtg Hwei Nsa

See details

Listing

Engel E-VICTORY 170H/50V/120 combi (2015) ecodrive , VIPER 20 LINEAR ROBOT Engel E-Victory 170H/50V/120 combi

Trenčianske Stankovce

18,022 km

Engel E-VICTORY 170H/50V/120 combi (2015) ecodrive , VIPER 20 LINEAR ROBOT
EngelE-Victory 170H/50V/120 combi

Call

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Csdpsxyi Rvefx Ai Nsha Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

See details

Listing

Rödermark

18,557 km

Automatic saw
ELUMATECSA 142-35

Call

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW Codpfoy Efl Nex Ai Noha - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

See details

Listing