Log band saws

WINTER ZL-60V

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dcjdpfxsw Dp Ufe Ab Tsr Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: ready for operation (used), Slab recovery line with below machines: Dodpfxsgwqk Ss Ab Tjcr One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Djdpfjug Ty Hsx Ab Tjcr Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Dcjdpfx Aeuix Sgjb Tjr Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, saw band width: 50 mm, type of input current: AC, power: 15 kW (20.39 HP), Width of saw 50mm Width between rollers 90cm Wheel diameter 62cm Main motor 15 kW Full hydraulics Dodpfx Abjq Hhluo Tecr

Condition: new, Aircraft A-K-MAX 5.5-10-270 (IE3) screw compressor Compact screw compressor with constant speed and innovative LOGIN control. TECHNICAL DATA General information Effective delivery rate approx. 705 l/min Maximum pressure 10bar Air outlet ½" Oil-free / oil-lubricated Oil-lubricated Filling quantity oil 4.6l Mobile / Stationary Stationary Dimensions and weights Length (product) approx. 1200mm Width/depth (product) approx. 680mm Height (product) approx. 1540mm Weight (net) approx. 239kg Electrical data Supply voltage 400V Mains frequency 50Hz Input power electric motor 5.5kW Motor efficiency class IE3 Electric motor speed 3000min¯¹ Noise emission Sound pressure level Lp62dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Motor(s) Motor type Electric Compressed air tank Tank capacity 270l EQUIPMENT Electronic control Oil heat exchanger ✔ Compressed air tank Hot-dip galvanized inside and outside Drive transmission Direct coupling Dcodpfx Abst Ifhyo Tsr Star-delta gearshift ✔ AD 2000 compliant yes

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run Dcodpfxjvwbg Uo Ab Tjr New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: new, The edger is used for double-sided edge trimming of boards and logs. The use of automatic width adjustment, smooth feed, and laser markings on the cutting guide enable optimal use of edged boards. Dedpfjwb Uwgjx Ab Tecr Technical specifications: Minimum cutting width: 60 mm, maximum cutting width: 500 mm (horizontal clearance: 700 mm) Edge thickness: max. 65 mm Infeed table: 2000 mm Pick-up table: 2200 mm Distance between electric saws can be adjusted via the control panel Feed speed: uniform Saw diameter: 350 mm Number of saws on the spindle: 2 Main motors: 2 x 5.2 kW Machine weight: 1000 kg – Laser for marking the cutting line (2) – Electronic width measuring controller ANP 05

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Edge thickness (max.): 3 mm Dcjdpfx Aowat Alsb Tjr Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: good (used), Year of construction: 1983, functionality: fully functional, cutting height (max.): 200 mm, rotational speed (max.): 580 rpm, roll width: 100 mm, roller diameter: 110 mm, Vertical trend and slitting band saw Manufactured by Raimann Dcedov T R R Uopfx Ab Tjr Type B 11 Year 1983 Roller diameter 110 mm Roller width 100 mm Speed -580 rpm Motor 18,5 Kw Cutting width R/L of blade-per.200 mm Cutting height 200 mm Feed stepless 10-40 m/min 1.5 kw Length of band saw blades 6300-6500 mm Electric motorized blade tensioning Pneumatic roller carriage adjustment