Wood shredder for roof battens with nails

Weima WLB 400

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty Dwodpfx Abohbduze Tsf We also deliver our racks for glass to the EU countries and other countries.

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Dwedpfjrq Dmrsx Ab Tof Working height from the ground 835 - 960 mm

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing Dedpod A Ttxsfx Ab Towf - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: new, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost Dwjdou Uu U Uspfx Ab Tjf (Technical information according to the manufacturer - without guarantee!)

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor Dwedpfx Aji Hmpieb Tof - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) Dwedpfxsw Tbw Aj Ab Tef – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2000, load capacity: 2,500 kg, lifting height: 6,200 mm, free lift: 1,760 mm, construction height: 2,700 mm, There are 6-8 different four-way forklifts by Jungheinrich, Linde, and Sichelschmidt in stock. Please also check my other listings. Additionally, I sell a large number of spare parts for Jungheinrich ETVQ four-way reach trucks. Simply inquire for more details. Four-way forklift | Four-way reach truck | Multi-directional forklift | Universal racking forklift Various driving modes can be set: - Longitudinal drive - Lateral drive - Diagonal drive (left and right) - Parallel drive - On-the-spot rotation Jungheinrich Model: ETVQ 25 Year of manufacture: 2000 Operating hours approx.: 6,836 h Load capacity: 2,500 kg with 600 mm load center Lift height approx.: 620 cm Free lift approx.: 176 cm Overall height approx.: 270 cm Overall width approx.: 175 cm Fork length approx.: 115 cm With fork positioner: 56 - 205 cm Djdpfsxdv Rqox Ab Tewf (See pictures – actual condition) Prior inspection is expressly recommended. Please leave your phone number by email, and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer, or shipped via freight carrier at the buyer's expense. Loading and packaging can be organized by us. The shipping costs indicated are guidelines—depending on distance and unloading options, actual costs may vary. Please inquire for a quote.

Year of construction: 2003, condition: good (used), Conveyor system (outlet) behind e.g. Weinig planing machine Dwjdpfx Aoxc Ecgeb Tsf Max. wood length 3200 mm, with cross transport With return belt 6000 mm