Used Ferrari 95 Rs for sale (29)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 14,100 h, load capacity: 46,000 kg, lifting height: 16,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 74,500 kg, drive type: Diesel, construction width: 4,185 mm, Full-container Reach Stacker Load center: 1780 Transmission: Dana TE32000 Condition: Ready for operation and fully functional Technical condition: very good Front tire size: 18.00-25 Rear tire size: 18.00-25 Hodpfxezxi I So Agtsfl EN: Hydraulically sliding cabin, central lubrication system for chassis, boom + spreader, rear-view camera, air conditioning (automatic climate control), automatic spreader adjustment 20‘-40‘ DE: 2x central lubrication for chassis, boom and spreader, hydraulically sliding operator cabin with electronic air conditioning, automatic spreader adjustment 20-40, reversing camera

Condition: used, functionality: fully functional, machine/vehicle number: A26062, Year of construction: 2017, operating hours: 15,790 h, load capacity: 46,000 kg, lifting height: 16,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,800 mm, power: 257 kW (349.42 HP), drive type: Diesel, Full-container Reach Stacker Chassis number: A26062 Mast type: Telescopic Transmission: Clark Dana TE32FF Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-25 Front tire condition: 60 - 80% Rear tire type: Pneumatic Hfedozw R Abspfx Agtjl Rear tire size: 18.00-25 Rear tire condition: 40 - 60% Side shifter, Heater, full cabin, air conditioning, Central lubrication system, camera.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,530 h, load capacity: 46,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,900 mm, power: 257 kW (349.42 HP), empty load weight: 83,700 kg, total length: 12,000 mm, drive type: Diesel, construction width: 4,185 mm, Full container reachstacker Load center: 1780 Transmission: Dana TE32FF Condition: Ready for use and fully functional Hfjdpozu T Izefx Agtsl Technical condition: very good Front tires type: Pneumatic Front tires size: 18.00-33 Rear tires Type: Air Rear tires Size: 18.00-33 EN: hydraulic support jacks for increase of capacity hydraulically sliding cabin central greasing system for chassis, boom + spreader rear view camera air-condition (automatic climate control) automatic spreader adjustment 20'-40' DE: hydraulic support for higher load capacity with larger outreach 2x central greasing for chassis, boom and spreader hydraulically sliding cabin with electronic air-condition automatic spreader adjustment 20-40 rear view camera

Condition: new, Year of construction: 2026, color: grey, Weights Empty weight: 160 kg Functional Lifting capacity: 200 kg Dimensions of cargo space: 145 x 90 x 200 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Mast type: Personnel lift Max swing of arm in degrees: 360 Hfodpfxsz Avqho Agtol Production country: IT Additional information Please contact Vink Machinery for more information Ferrari Skyler 2 AL 200 2-person basket * NEW * For Hoeflon C6 or C10 * Manually rotatable * 160 kg dead weight * 200 kg lifting capacity

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Hsdpfx Agsw Ag Ndetofl Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance.

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm Hjdpfxjzruu De Agtefl - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2009, operating hours: 17,469 h, load capacity: 45,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 4,810 mm, gearing type: automatic, Equipment: cabin, head guard, COMING SOON!!! CVS Ferrari F478 Reach Stackers Technical Vehicle Data* Manufacturer: CVS Ferrari * Type: F478 * Drive Type: Diesel * Load Capacity (LSP): 45,000 kg * Operating Hours: 17,080 hrs. * Year of Manufacture: 2009 Hfodpfsy D Dmisx Agtel * Tare Weight: 7,100 kg ----Mast Data / Dimensions:* Mast: Telescopic * Lifting Height: 16,020 mm * Overall Height: 4,810 mm ----Engine, Transmission & Performance:* Engine: Scania DC1258A * Transmission: Torque Converter * Power: 257 kW ----Tires:* Front Tires: Air Dual, Size 18.00-25, Condition 40-60% * Rear Tires: Air Single, Size 18.00-25, Condition 60-80% ----Equipment & Attachments:* Attachment: Side Shifter 20/40, Hydraulic Spreader * Special Equipment: Full Cab ----Vehicle Number/Vehicle: 12015----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transportRegistration of vehiclesRecovery and vehicle transport----?YOUR VTS TEAM

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW Hfjdjzx S Dcopfx Agtol - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,800 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, power: 257 kW (349.42 HP), empty load weight: 70,000 kg, drive type: Diesel, Full-container reach stacker Load center: 1780 Transmission: Dana TE32418 Condition: Ready for operation and fully functional Technical condition: good Front tire size: 18.00-25 Front tire condition: 60 - 80% Hedpfx Aozx H Hxjgtofl Rear tire size: 18.00-25 Rear tire condition: 40 - 60% EN: central greasing system, air-condition (automatic climate control) DE: central lubrication system, electronic air conditioning

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 18,155 h, load capacity: 45,000 kg, lifting height: 14,565 mm, fuel type: diesel, power: 243 kW (330.39 HP), empty load weight: 65,600 kg, drive type: Diesel, construction width: 4,150 mm, Full-container reach stacker Transmission: Clark 4-speed automatic Condition: Ready for operation and fully functional Technical condition: Good Hfjdpfozxi Ncex Agtjl Front tyre size: 18.00-25 Rear tyre size: 18.00-25 Piggy-back, hydraulic pile slope on spreader, hydraulic sliding cabin

Condition: used, functionality: fully functional, machine/vehicle number: A26012, Year of construction: 2009, operating hours: 11,155 h, load capacity: 45,000 kg, lifting height: 16,060 mm, fuel type: diesel, mast type: telescopic, construction height: 4,920 mm, power: 185 kW (251.53 HP), empty load weight: 85,500 kg, drive type: Diesel, construction width: 4,200 mm, Full-container reach stacker Chassis number: A26012 Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 20 - 40% Hjdszw R Drspfx Agtefl Description: Stabilization system, air conditioning, central lubrication system, heating, scale Side shifter, Heater, fully enclosed cab, air conditioning

Condition: used, functionality: fully functional, machine/vehicle number: A26016, Year of construction: 2007, operating hours: 16,900 h, load capacity: 45,000 kg, lifting height: 16,060 mm, fuel type: diesel, mast type: telescopic, construction height: 4,910 mm, power: 257 kW (349.42 HP), empty load weight: 78,200 kg, drive type: Diesel, Full container reach stacker Chassis number: A26016 Mast type: Telescopic Transmission: Torque converter Hodpozw R Dfofx Agtjfl Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 80 - 100% Side shifter 20/40 hydraulic spreader Full cabin

Condition: used, functionality: fully functional, machine/vehicle number: A26610, Year of construction: 2006, operating hours: 24,000 h, load capacity: 25,000 kg, fuel type: diesel, construction height: 2,900 mm, power: 156 kW (212.10 HP), drive type: Diesel, Terminal Tractor Chassis number: A26610 Transmission: Allison MD3060 Condition: Ready for operation and fully functional Technical condition: good Hjdpfx Aszw Rz Djgtsfl Front tire type: Pneumatic Front tire size: 11.00-R20 Rear tire type: Pneumatic Rear tire size: 11.00-R20 Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing at fair terms are always possible for us. We are also happy to buy your used vehicles outright, even if you do not purchase a vehicle from us. Call Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way: Our forklift specialist workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale.

Condition: used, functionality: fully functional, machine/vehicle number: A26023, Year of construction: 1999, operating hours: 4,850 h, load capacity: 42,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 175 kW (237.93 HP), empty load weight: 69,500 kg, drive type: Diesel, Full-container reachstacker Chassis number: A26023 Hfodpjzv Alxofx Agtjl Transmission: Clark 32000 Condition: Ready for operation and fully functional Technical condition: good Front tire type: pneumatic Rear tire type: pneumatic Description:

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 Hfedpfx Agsuhbuujtsl - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm Hjdpfx Agjlwqgajtjfl - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Condition: used, Year of construction: 2003, operating hours: 20,500 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available; location is between Munich and Nuremberg. Inspection and collection possible near Munich. All inspections have been carried out, good condition. Volvo engine 174 kW. Viewing by appointment only. F 365 Ferrari Front width: 4250 mm Rear: 3360 mm Chassis length: 8600 mm Overall height: 4700 mm Chassis height: 3660 mm (A-frame) Weight: 65600 kg, 9500 kg spreader, 8500 kg mast Chassis weight: 47600 kg Hfsdpfx Aezfylhjgtjl Transport dimensions/weight

Condition: used, Year of construction: 1996, operating hours: 20,700 h, load capacity: 41,000 kg, lifting height: 15,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available. Location is between Munich and Nuremberg. Inspection and pick-up by appointment in the Munich area. All inspections have been carried out. Good condition. New Mercedes engine, 222 kW, 302 hp, 302 engine hours, 1150 total hours. Viewing by appointment only. F 198 Ferrari Hfjdpfxszfykqo Agtol Width front: 4250 mm Rear: 3360 mm Chassis length: 8800 mm Overall height: 4570 mm Chassis height: 3350 mm A? Bock Total weight: 66,800 kg - 9500 kg spreader? 8500 mast

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 1,050 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis C.B. Ferrari B16 was manufactured in 1998. It features an X-axis travel of 1,050 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine is equipped with an electrospindle capable of reaching a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari B16 vertical machining centre we have for sale. Contact us for further details. • 4-axis continuous machining center with tilting head • Spindle type: Electrospindle • Collet holders, various: 45 units • Tapping holders: 3 units • Milling holders: 6 units • Weldon holders, various: 15 units Hedpfxszk Dxpj Agtsfl • Vices: 2 units

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° Hodpeyazmdofx Agtofl -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg

Condition: good (used), Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm Hedpfx Aofrpnwjgtofl -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Condition: used, "CB" Ferrari Milling Machine Model B130 CNC ELEX E-550 Complete with standard equipment Hjdpexwvi Tsfx Agtsfl X-axis travel: 650 mm Y-axis travel: 320 mm Z-axis travel: 320 mm Spindle speed: 22,000 rpm ISO 40 ATC with 18 positions

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: grey, first registration: 01/2008, Year of construction: 2008, driver cabin: other, Vehicle location: Bovenden, emergency stop. Superstructure: Work platform, capacity 200 kg. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors! Hfjdpfx Aoi Rnb Ujgtsl

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 850 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 420 mm, overall weight: 8,000 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis C.B. Ferrari A152 was manufactured in 2009. It features an X-axis travel of 850 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine has a table working area of 1720 x 525 mm and a main spindle speed of 16,000 RPM. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari A152 vertical machining centre we have for sale. Contact us for further details. • Table working area: 1720 x 525 mm • Rapid traverse: X 40 m/min; Y/Z 30 m/min • A-axis speed: 200 rpm • B-axis speed: 10,000 rpm Hfsdpfxsyn Hmle Agtjl • Machine dimensions: 2,400 x 2,700 mm

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Hfsdjpkyn Repfx Agtjl