Vise

Black Steel Profi 200

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering Pedpjw I Hqwjfx Apderc - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. All complete. Very good condition. Available as a set. Possible to buy also separately. Prjdpog Tumyofx Apdsc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Prsdpfev A Htqsx Apdjc Weight 1950 kg Total power requirement 13,5 / 17,5 kW kw

Condition: used, mileage: 323,000 km, power: 120 kW (163.15 HP), first registration: 06/2010, fuel type: diesel, overall weight: 5,000 kg, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Mercedes-Benz Sprinter 516 ambulance * First registered: 06-2010 * Automatic transmission * Includes stretcher * Auxiliary heater Podpfjz A N I Rsx Apdjrc * Air conditioning * Leaf spring suspension * More photos and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: used, Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition Pjdpszh Hawjfx Apdorc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice Pjdpfx Aevm U Htepdjrc -Parallel vice: jaw width 150 x 30 mm -Wingspan: 235 mm -Dimensions: 490/220/H195 mm -Weight: 26 kg

Year of construction: 1993, condition: new, Load capacity: 10 t lowest height (top): 800 mm Pedpfx Apedc Sx Ssderc Lowest height (feet): 100 mm Stroke: 400 mm Lifting height max .: 1200 mm Weight: 42 kg

Condition: excellent (used), mileage: 138,600 km, power: 132 kW (179.47 HP), first registration: 05/2011, fuel type: diesel, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, loading space length: 5,500 mm, loading space width: 2,300 mm, loading space height: 2,350 mm, Year of construction: 2011, Equipment: tail-lift, Well-maintained Renault Midlum 180 service truck/box truck from 2011. Ideal for road construction, utility companies, technicians, service personnel, or as a mobile workshop. Well-maintained and ready for immediate use. Make: Renault Prsdpfxezpfgle Apdjc Model: Midlum 180 First registration: 05/04/2011 Emission standard: 5 Cargo area: Length: 5.5 m Width: 2.3 m Height: 2.35 m Payload: 3845 kg Gross vehicle weight: 80 kg Towing capacity: 3500 kg Front tire tread: +/- 50% Rear tire tread: +/- 50% About Cevoman: ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected in our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experienced in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Prodpfewini Eox Apdoc Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Psdpfxjt Tqy Es Apdjrc Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...