Through drill

Vitap

Condition: good (used), Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Kjdpfxez Dkwvs Ahgonb Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

Condition: excellent (used), functionality: fully functional, 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm Knodpfx Aoz D Ac Rshgsb magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: used, machine/vehicle number: 008576, X axis working area: 3000 mm Y axis working area: 1230 mm Main Electrospindle power: 3.6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 20 Kjdpfx Ahjzylvzegjnb Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Ksdpfx Ast H Twyjhgenb

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Knsdoyrrhispfx Ahgsb Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: excellent (used), functionality: fully functional, 21 spindles spindles right/left table dimensions 840x440mm 2 pneumatic clamps Knjdpfxszz N Tme Ahgjb spindles span 32mm pedal control pneumatic setting vertical/horizontal

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 110053, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, workpiece weight (max.): 25 kg, number of axes: 3, total height: 1,600 mm, total length: 2,134 mm, total width: 1,286 mm, overall weight: 715 kg, Equipment: CE marking, documentation/manual, We offer this very good Vitap POINT2 machining center, year of construction 2011. Type: POINT2 Ksdpfxjzzf Itj Ahgonb Serial number: 110053 Year of construction: 2011 Weight: 715 kg Nominal supply voltage: 400 V Supply frequency: 50 Hz Nominal current: 8.9 A Max overload current: 0.008 kA 8 vertical drills 4 horizontal drills on X direction 2 horizontal drills on Y direction 1 saw blade If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Knsdezyr Epopfx Ahgjb

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM Kjdpfx Ahszvduuegenb - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant Knodpfezuxdbjx Ahgsb - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.