Industrial X-ray system

VisiConsult XRH 222-S

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Codpfxoy Tmhzo Ailorh Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Year of construction: 2019, condition: ready for operation (used), number of axes: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. • Laterally correct image (no reflection) for easy evaluation • 3-position objective turret for quick magnification selection • Magnifications: 10×, 20×, 50×, 100× Csdpfsx D I Etex Ailsrh • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary stage type 2 • Maximum workpiece height: 100 mm • Integrated XY and angle digital display for precise readings • Illumination: combination of contour (transmitted) and vertical (incident) light • Light source: 24 V / 150 W halogen for high-quality projection • 4-fold condenser in transmitted light with automatic illumination adjustment to magnification • Optics: semi-transparent mirror for clear incident-light image; telecentric lenses for distortion-free imaging across the full field • Focusing via movable optical head (stage remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; inclination/area illumination ±0.15% • Solid construction with precision-engineered guides; workshop-ready and easy to operate • Proven Nikon quality, made in Japan • Large projection area suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision mechanics, and sample inspection • Flexibly upgradeable with digital interfaces or SPC connectivity

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 Csdpfx Aiswlp Hdolorh If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Crodpfx Aiovffcpoleh Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Cjdpjvmpt Uofx Ailorh Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Weight: 520 kg

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 kV output: The system underwent a complete overhaul in 2020. The flat panel and all axis control electromotors were also replaced! The stained glass viewing window with a safety lock can be opened with two hands, allowing workpieces to be inserted without stopping the radiation. The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and improves the accuracy of the evaluation. However, manual movement for inspection is also possible. Size and weight of the workpieces: - Diameter: 400 mm, Length: 900 mm, Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg - Computer control The machine automatically moves the inspection table and adjusts the tilt angle and height of the C-arm according to the program compiled based on the parameters of the areas to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components can be loaded into the cabin at the same time, and the machine examines them one by one according to the programming. MG 165 X-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focal spot size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, colour TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ - Image processing control - Digital image processing software - Image archiving - Image captioning - Image comparison with a reference image - Zoom function - Blackout control Crjdpfx Aisu Hzvxolsh - Fast video card + Frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system - DICONDE data format

Condition: excellent (used), Vertical Machine Center Chiron FZ12W Magnum Sinumerik 810 M Max RPM 8.000 rpm./min, X = 550 mm Y = 300 mm Z = 425 mm 2 x 4th axis Peiseler RT 160 hydraulik brake Nose tool SK 40, Cooling throw spindel IK ATC 20 pcs Machine is still running the production, and can be inspected any time Crjdpfx Ajlng D Aoiloh Machine in very good technical condition. I am giving 3 months startup guarranty

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 240 V, Equipment: type plate available, Used Keyence Digital Microscope VHX 900/950F Set in Flightcase Manufacturer: Keyence Model: VHX 900/950F Voltage: 100-240 VAC (50/60 Hz) Set consists of: – Digital microscope + power cable Csdpov A Uptjfx Ailjrh – Digital camera – Lens (Keyence VH-Z20R) – Camera holder + mount – Keyboard + mouse – Console controller – Flightcase

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10003426, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Codoyfgzkopfx Ailorh

Condition: like new (used), operating hours: 50 h, Open tube 160kV HR – High Resolution – W Target (4W) & Standard W target (10W) 1308 HR FP Detector (13x08cm) High & Medium Quality and Realtime modes Crodpfsymmapox Aileh Detector Tilt ± 60° 24” Ultrasharp monitor BGA & Area Void analysis Traceability package X-ray ‘ON’ hours ~45 hour Win10 PC Available for transport!