Horizontal lathes Victor Vturn-26

Victor Taichung Vturn-26

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 850 mm, turning diameter: 400 mm, CNC lathe Victor Vturn A-26/85 YCM with Y-axis Hnjdpfx Aaezkk Spj Eep Year of manufacture: December 2023, installation: 2024 Only 350 cutting hours! Fanuc Oi-TF with Manual Guide Turning diameter: 400 mm Turning length: 850 mm Main spindle: 3500 rpm, 22 kW BMT65 turret, 12/24-position Tool drive: 6000 rpm Y-axis travel: +/- 55 mm C-axis Chuck: 250 mm, spindle bore: 76 mm Coolant pressure: 6.5 bar Chip conveyor Tool measurement system Programmable tailstock

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length Hnedjkwcdbepfx Aa Ejp 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Hodpfx Aasy N A Hxs Eenp Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, Victor V26-II CNC lathe; with C-axis; with driven tools; FANUC 21i-TB control; chuck: 10"; turning diameter: 520 mm; turning length: 1090 mm; spindle speed: 3,500 rpm; upper turret toolholder with 12 positions, 6 of which are driven; tool presetting device; chip conveyor; oil mist extraction. Hedpfxor E Amge Aa Eenp

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light Hnedpfx Aajlhwr Ro Esp - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Hnjdpfx Aed Nw Ttoa Eop

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V Hsdpfx Aasz N Ame Esnp sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Hodpfxoxln Iws Aa Eonp Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, TECHNICAL DETAILS Hedpjuhbplofx Aa Ejnp - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Table 1000 x 1000 Hnedpfx Aajt T Rkds Eop