Wide belt sander

Vertongen M-300 Combi

Condition: excellent (used), functionality: fully functional, Vertongen M-300 Combi Throughfeed Sander Iijdpfx Aheyn Aqaocjd Working width: 300 mm Working height: up to 200 mm Combi unit with pad Pneumatic oscillation Manual raising and lowering of the work table Two feed speeds Main motor: 5.5 kW Abrasive belt: 300x1900 mm Weight: approx. 600 kg

Condition: excellent (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds Iiodpfx Ahevu Hgbecsd - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Iijdpfswzzivox Ahcjd Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: excellent (used), Griggio wide belt through-feed sander Combination unit with pad, rubber-coated calibration roller. Oscillation with photocell, electric table lifting. Iiodpfx Ahexixxnoced Dimensions: length 140 cm, width 100 cm, height 210 cm Machine in very good condition.

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, Isdpfx Aheu R Tbhoceid frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy Iodpfx Ahevnv Tqscsid - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Isdpfxemcaaho Ahcjid Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: excellent (used), functionality: fully functional, working width: 950 mm, Calibrating/sanding machine "SCM" model SANDYA 3S CODE: CAL-055 USED MACHINE - V380/50 - "CE" ▸Working width: 950 mm ▸1st unit: steel roller ▸2nd combined unit: rubber roller / timed, sectional pneumatic pad ▸Additional rigid pad ▸Pneumatic exclusion of the rollers from the frame ▸2 conveyor belt speeds Iisdsy Tlxrspfx Ahcsd ▸Automatic table positioning ▸Roller conveyor with 2 idler rollers at the inlet/outlet ▸Motor power: 7.5 kW

Condition: excellent (used), Through-feed sander Vertongen S320 Iiedpfeyg Dlcox Ahcjd Working width 300 mm Working height up to 180 mm Combi unit with pad Manual raising and lowering of the working table Two feed speeds: 7–14 m/min Main motor 5.5 kW

Condition: new, Year of construction: 2026, DT1500M Grinding Table – Professional Workstation for Metal Sanding The DT1500M Grinding Table is a modern solution designed for intensive locksmith and industrial applications that require effective extraction of dust and fumes. Thanks to its dual independent fans and efficient filtration system, this sanding table ensures a high level of workplace safety and environmental protection. It's an ideal choice for industrial facilities, mechanical workshops, paint shops, and metalworking studios. Key Advantages Dual filtration system – Captures over 99.9% of dust particles, protecting both the operator and the surrounding environment. High ventilation performance – Two centrifugal fans with a combined capacity of 8000 m³/h. Eleven worktop segments – Provide ergonomic working conditions and make filter cleaning easier. Iijdpew Hcrpofx Ahced Bottom and side ventilation – Effectively removes contaminants from various work zones. Metal waste drawers – Located on both sides for easy disposal of sanding debris. Heat-resistant filters – Ensure durability even under demanding conditions. Construction and Technology The DT1500M is built with a robust welded steel frame that resists vibrations and mechanical damage. Two built-in suction units and a dual-filtration system ensure quiet, reliable operation. The modular segmented worktop allows easy fixture of workpieces and simplifies maintenance. Precision and Work Efficiency Equipped with high-performance centrifugal fans and precise filtration systems, the DT1500M supports continuous and safe operation, even during heavy-duty metal grinding. Noise-dampening components and a carefully engineered airflow system contribute to both efficiency and ergonomics. Applications The DT1500M is ideal wherever harmful metal particles and dust must be removed – including locksmith workshops, paint shops, assembly lines, and industrial plants using grinding tables for daily component processing. Standard Equipment Dual air filtration system Two centrifugal fans (left and right side) Metal waste drawers Segmented worktop Ventilation system from bottom and side panels Technical Specifications Parameter Value Worktop dimensions 1530 × 510 mm Motor power 2 × 0.75 kW Airflow capacity 2 × 4000 m³/h Filter dimensions 2 × (395 × 495 × 24 mm) Voltage 230V Weight 102 kg Dimensions (L×W×H) 1560 × 560 × 850 mm