Lead- and tension spindle lathe

VDF HEIDENREICH & HARBECK M 530

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm Hjdpfx Aaeirax Ujhsp -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic Hedpfx Aaowkvq Hshjp - Double miter - Material detection during lowering - incl. 7 saw blades

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Hodpexwmbmefx Aahjp

Condition: excellent (used), Year of construction: 2004, winch inkl. Hodjq N E U Aspfx Aahjp lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 1000 mm turning diameter in the gap 850 mm turning speeds 15 - 810 U/min centre height 300 mm Hjdpfx Ajw Tdxcsahsp spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Hodsxrcnlopfx Aahjp

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm Hsdpfsxpuu Esx Aahsp 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight Hjdpfxsudi Unj Aahjp 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm Hsdpfx Aaogryl Ajhep strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Hedpfxjxz Rfke Aahep Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany