Center lathe

Used Harrison V350 Gap Bed Centre Lathe

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Predpowmm S Tsfx Adned Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: good (used), spindle bore: 66 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, quill stroke: 160 mm, quill diameter: 70 mm, center height: 280 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 2,500 rpm, total length: 2,850 mm, total width: 1,820 mm, total height: 1,750 mm, overall weight: 2,750 kg, torque: 1,600 Nm, We offer here a lathe from the brand "WEILER", model E50x1000. Please refer to the attached PDF for details. The extensive accessories are also listed there. Kind regards, Wiegand Company Prsdpew Trbfofx Adnod

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min Prjdpot U Rm Isfx Adned spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Pjdpfjv Suwiex Adnerd Movement X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.

Year of construction: 1994, condition: used, rd 10 - 75 mm, fl 59 x 60 mm Prodpferrmijx Adned

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Pedpfx Adjm Nb Risnord >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Pedpfsw T Sc Nsx Adnerd Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Prodpfsxd Tikex Adned Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: used, machine/vehicle number: 217 0055/5, Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm Pjdpfx Ajha Hvvsdnerd -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: good (used), Year of construction: 2011, 400mm swing over bed, Predpfx Adsucdt Ajned 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant