Roller leveller

UNGERER 1780X2

Year of construction: 2010, condition: good (used), weight 3000 kg Ijdpfx Aehhiawobnoif

Condition: good (used), functionality: fully functional, Year of construction: 2002, coil weight: 5,000 kg, coil width: 1,500 mm, product width (max.): 1,500 mm, sheet thickness (max.): 5 mm, total length: 3,350 mm, total width: 1,600 mm, total height: 2,000 mm, power: 7.7 kW (10.47 HP), Decoiler, Coil size 1500 mm, max. load 5000 kg, inside dia. 430 - 530 mm, motor 7,7 KW, dimensions 330x150x200 cm, weight 2500 kg Iiodoyci Smjpfx Abnef

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Ijdpehx R Etofx Abnsif Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Reel - straightening - combination strip width: 360 mm Strip thickness: 0.6 - 3.5 mm Cross-section: 900 m² at 400 N/mm² - Straightening rollers: 7 - Single roller infeed - Infinitely variable speed control via frequency converter - 2 pneum. draw rollers Reel: Iodpfxjtq Sgns Abnoif - Coil weight: 2000 kg - manual spreading - pneum. pressure arm - common base frame

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Iijdpfx Aboxyhhajnef Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately. Iijdpjv Tzphofx Abnef

Condition: used, Year of construction: 1994, Straightening roller diameter 18 mm Number of straightening rollers 19 pieces max. strip width 260 mm Ijdpfxsrm Nk Ij Abneif Coil weight max. 2,000 kg / side further data and pictures on request used, as-is ex stock on request with overhaul, delivery time by arrangement

Condition: used, sheet width 320 mm Iedpsqkwviefx Abneif coil weight 1,5 t coil outside dia. 1250 mm diameter of the mandrel 370/430 mm Mandrel height 1000

Condition: used, Year of construction: 1989, number of straightening rollers: 21, straightening roller diameter: 80 mm, sheet thickness steel (max.): 10 mm, product width (max.): 1,250 mm, Sheet width: 1250 mm Sheet thickness: 10 mm Number of rollers: 21 pcs Roller diameter: 80 mm Iisdpfxjyykyhe Abnof Belt speed: 12 m/min Adjustable cross-section: 5700 mm² Total power requirement: 60 kW Equipment: Working direction: left to right Strip infeed: left Belt speed control: three-phase motor Measuring device: digital display Roll stand adjustment: motorized Positioning control: TWIN-Control Quick-change system: hydraulic

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Iiedpsx Ih D Hefx Abnef