Laser cutting machine

TRUMPF TruLaser 5040

Condition: used, Year of construction: 2012, TRUMPF TruLaser 5040 6kW Laser, manufactured in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded, and maintained throughout its entire operation period. The TRUMPF TruLaser 5040 (L18) laser cutting machine is designed for precise cutting of sheet metal made from materials such as steel, aluminum, copper, and brass. Laser cutting is performed using a stable 6 kW laser beam generated by a high-efficiency resonator. A range of additional systems streamline the machining process while enhancing cutting quality. The entire cutting process is fully automated, thanks to the automatic pallet changer system. This system enables simultaneous loading and unloading of workpieces during operation, thus increasing productivity and minimizing machine downtime. The TruLaser 5040 is offered with extensive equipment, including additional cutting heads and an advanced CNC controller with many useful features. In September 2022, the complete set of quartz tubes, all internal optics, and the lamp were replaced. The external optics were cleaned and calibrated in September 2025. Filters and oils were changed according to TRUMPF’s recommendations. Once a year, the water was changed along with flushing the CU and AL circuits. All these procedures are documented with proper service reports. Both original lenses for both heads and an optics case are supplied with the machine. Technical specifications of the TRUMPF TruLaser 5040 laser cutting machine: - Laser power: 6 kW - Travel (X/Y/Z axes): 4000/2000/115 mm - Maximum cutting thickness (mild steel): 25 mm - Maximum cutting thickness (stainless steel): 25 mm - Maximum cutting thickness (aluminum): 25 mm - Maximum cutting thickness (copper): 10 mm - Maximum cutting thickness (brass): 10 mm - Operating hours: 51,839 h - Machine on-time: 79,497 h - Compressed air connection: 7-10 bar - Nitrogen (N2) supply: 30 bar - Oxygen (O2) supply: 20 bar - Connected load: 120 kVA - Machine power supply: 400 V; 50 Hz TRUMPF Laser Cutter Equipment: - CNC control: TRUMPF - Laser source: TRUMPF TruFlow 6000 - BrightLine system (improves quality of thick sheet cutting) - FlyLine system (fast hole cutting in thin sheets without pre-piercing) - PierceLine system (monitors and controls piercing process, reducing duration by up to 80%) - 250 mm cutting head - 175 mm cutting head - Automatic pallet changer system - Cutting with compressed air, nitrogen or oxygen - Longitudinal conveyor belt Nedsx Nil Iepfx Affowr

Condition: used, Year of construction: 2008, Year of manufacture: 2008 Nwjdex Nm T Nspfx Affer Operating hours (beam ON): approx. 22,900 h, Maintenance recently performed, machine in operation Working area: 2,000 x 4,000 mm Laser type: CO2 laser TruFlow 5000 Laser power: 6 kW Control system: Sinumerik 840D

Condition: excellent (used), Year of construction: 2007, Technical data: 2D laser machine CNC control: SIEMENS Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 5 kW Cutting capacity (steel): 25 mm Cutting capacity (stainless steel): 20 mm Cutting capacity (aluminium): 12 mm Max. workpiece weight: 1250 kg automatic pallet changer Nwsdexyavvjpfx Affjr CE marking electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t The seller assumes no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is commensurate with its age; used machines are sold without any warranty.

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Nwsdexqtx Sjpfx Affor Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: excellent (used), Year of construction: 2022, Flatbed 8 kW Fiber Laser Cutting System – Maxi Format ONLY approx. 1,500 operating hours 8,000-watt fiber laser Available immediately Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L76) Year of manufacture: June 2022 Working area: 4,000 x 2,000 mm (maxi format) Laser power: 8,000 watts, solid-state (fiber) Control system: SINUMERIK 840D SL Operating hours, approx.: Laser beam on: 1,500h; Machine on: 4,000h (as of July 2025) TECHNICAL DATA: Dimensions: Length: 11,200 mm; Width: 6,373 mm; Height: 2,200 mm Weight, approx.: 14,300 kg Working area; X, Y-axis: 4,000 mm x 2,000 mm Max. workpiece weight: 2,000 kg Laser power: up to 8,000 watts Max sheet thickness: Mild steel: 32 mm (increased sheet thickness package) Stainless steel: 40 mm Aluminium: 25 mm Copper: 10 mm Brass: 10 mm Average power consumption in production; TruDisk 8001, 17 kW SPECIAL EQUIPMENT: External solid-state laser TruDisk 8001 with 1 fiber optic output featuring SmartBeam Control EdgeLine Bevel (license fee may apply, only in conjunction with TruTops Boost) CoolLine with continuous water supply Connection for additional cutting gas Cutting package for increased sheet thickness Cross conveyor (right side of the machine) Cleaning brush CO2 extinguishing system for compact dust extractor Exhaust duct adapter for compact dust extractor OPC UW for Machine Tools basic (unmatic, license may be required) EXTENDED Standard Equipment: Support bars made of mild steel (67 mm spacing) TruDisk power supply via machine Compact dust extractor Production transparency TruTops Monitor incl. initial setup for 1 machine, 1 client DetectLine Drop & Cut Smart Nozzle Automation Automatic longitudinal pallet changer Operating environment temperature 5 to 35 / 45 °C FEATURES: Machine: Fully enclosed machine frame Gantry drive with linear direct drives Enclosed laser beam guidance via fiber optic cable Chiller unit for machine and laser (water-air) Longitudinal conveyor belt Integrated control cabinets Integrated cabinet Work area lighting Positioning laser diode Spray device Automatic nozzle cleaning Machine status indicator Cutting Unit: 1-cutting head strategy Universal cutting unit with fully adaptive lens system Protective glass Online protective glass condition monitoring Automatic nozzle centering Dynamic focus control Control System: Sinumerik 840D SL Fast reproduction Integrated technology data Automatic shut-off Programmable cutting gas/pressure selection Microweld Production planning Remote support interface Multi-sheet processing – Condition Guide Cutting Guide Ergonomic 21.5" wide-screen multi-touch control panel Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine FocusLine Copper cutting package Brass cutting package HighSpeed cutting package PlasmaLine – BrightLine fiber Performance melt cut package Data Transmission: USB interface RJ45 network connection Central Link Online Update Manager Nsdpew U Ecxsfx Affewr TRUMPF Laser: Highspeed ECO Excitation via pump diodes Laser power control New price over €800,000 This used machine can be inspected under production conditions. All information without guarantee – sale excludes all warranties and guarantees. Subject to prior sale.