Laser cutting machine

TRUMPF TruLaser 3030 (L20)

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 23,295 h, control type: CNC control, The original invoice for the machine; it was purchased in 2022 for 225,000 euros and has hardly been used. CO2 Laser Cutting System Manufacturer: TRUMPF Model: TruLaser 3030 Lean Edition L 20 Year of manufacture: 2012 / overhauled in 2023 Djdpfsx Sxwxsx Afnjul Operating hours: 23,295 / Working hours: 7,181 Power: 3,200 Watt Max. material thickness Steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Max. feed rate: 140 m/min Positioning accuracy: 0.1 mm Length: 6,500 mm Width: 7,600 mm Height: 2,200 mm Weight: 12,000 kg

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Dedpfx Afjdrc Txsnjul Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Duodpfx Asv Hxbbofnjl

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Dujdewh R R Nopfx Afnol

Condition: used, IDC000100 Complete sawmill Duodpfx Aevgdy Aofnol - Valon Kone VK26M with infeed and outfeed conveyors - merry go around system - ARIVislanda KS12 37 kW x 2 - ARI Slab saw - ARI KL10 split saw - Soderhamn Eriksson 519C, edger with chipper heads - Bruks Chipper 1300 Complete with control system and mechanization.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Dsdpek Hz Nqsfx Afnoul Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm spindle taper: SK 40 Dujdpfxodhhpro Afnsl spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, Fully operational block production plant equipped for both concrete and lightweight expanded clay aggregate (LECA) block manufacturing. Currently in use — production process can be demonstrated on site. Key Features: Metalika concrete mixer (2022) with integrated precise moisture sensor Many new moulds available Average production capacity: • 270 m² of pavement blocks per shift • 50 m³ of LECA blocks per shift Technical Specifications: Upper and lower vibration system 1.5 m³ ready-concrete hopper 0.75 m³ mixer with 11 kW motor 8 m³ material bunker Hydraulic power unit Water metering system Precise moisture meter Adjustable/variable production speed Automatic production pallet de-stacking and stacking Pneumatic palletizing gripper Large quantity of production pallets included Current molds in stock (size in mm): Building blocks (LECA blocks): 1) 500x300x200 2) 400x200x200 Pavement stones: 1) 200x100x50 2) 200x100x60 3) 200x100x80 4) 180x120x60 5) 180x120x80 6) 240x60x80 Djdpfx Ajwdf U Ujfnsul 7) 300x300x60+300x150x60+150x150x60 8) 240x240x60+240x120x60+180x120x60+120x120x60+120x60x60 9) 300x300x80+450x300x80 Kerb stones: 1) 800x200x70

Condition: new, Year of construction: 2023, fuel: diesel, continuous power (apparent): 8 kVA, !!!!! NEW FORD DIESEL GENERATOR FDT9200SE 8KVA !!!!! It is a quiet FORD FDT9200SE and compact yet very powerful HEAVY DUTY standby generator from Ford and offers switchable 230V single-phase or 400V three-phase power and a reliable emergency power source. This mobile generator is powered by an air-cooled 4-stroke single-cylinder Hyundai diesel engine with a displacement of 498 cm³ and a maximum output of 7.9 kVA (400). Available connections are 1x PCE5p (400) and 1x 32 (A) sockets. To limit nuisance, the generator is enclosed in a sound-absorbing housing and ensures that nuisance within the business premises is kept to a minimum for you, your family or your employees. The generator is also equipped with an AVR generator, which ensures a stable power supply for both essential functions and is suitable for more sensitive electronic devices such as televisions, computers and smartphones. With a full fuel tank, the generator runs for approx. 13 hours at 50% power. In addition to the electric start function, the machine has a practical digital control panel that displays frequency, voltage and total running time, and the generator is automatically switched off if the oil level is too low, so that the engine is protected at all times. The generator requires little service and maintenance and is very user-friendly. Single-phase and three-phase current Suitable for ATS (automatic transfer switching) Economical consumption, approx. 1 l/h 4 pieces are available. Djdpfxsu Tk R Aj Afnsul

Condition: like new (used), Year of construction: 2024, Teschniche data: Sheet length 4,100 mm sheet thickness 6 mm width of the stand - mm Total power requirement 15 kW weight approx. 11,5 kg Dimension (LxWxH) 5250 x 2300 x 22150 mm Backgauge 1000 mm D-Touch 7 touch screen CNC control, user friendly Central cutting angle adjustment Ball screw, 1000 mm & automatic swivel open Support balls in table for better material handling Side stop with scale & T-slot and tilt stop Support arms with T-slot and tilt stop Cutting line illumination & 1 m hinged finger guard High performance hydraulic and electronic components Automatic pressure adjustment Pivoting backgauge Cutting line illumination Foot pedal CE standard for EU Duodjh Ib T Ujpfx Afnol The machines can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our site in Staufenberg. We will be happy to provide you with further information on request.