Press brake

Triumph Truebend 5230

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: HFE 3i 1003 L | 101075, control type: CNC control, Condition and details, see pictures. The machine is currently being sold without tools. Ndedpfxoxfg U Nj Abgod

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min Ndedpfx Abov T Np Asgjd rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 12,622 h, functionality: fully functional, overall weight: 300 kg, total length: 1,250 mm, total width: 650 mm, total height: 1,750 mm, power: 7.5 kW (10.20 HP), fuel type: electric, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: refrigerant dryer, type plate available, Kaeser AIRCENTER SM 13 screw compressor 8 bar 7.5 kW Operating hours: 12,622 h Installed refrigeration dryer Kaeser ABT 15 Maintenance carried out with the following items: - Compressor filter set - Oil separator cartridge Nsdpfovyr R Aox Abgjdd - Fluid Rotary S-46 - Cooling fluid

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm Nedpfx Abou T Nknjgjdd - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Njdern Riqepfx Abgedd Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Nedpfxogvkmro Abgjdd Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 2017, Doosan Puma GT3100M year 2017 Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: 376 mm Turning length: 1245 mm Main spindle: Belt-driven spindle Ndsdexggktspfx Abgsd Maximum spindle speed: 2800 rpm Maximum power: 22 kW Maximum torque: 1124 Nm Bar capacity: 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-station turret BMT65 turret head Travel in X/Z axes: 260/1350 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, Electromechanical press brake Bending length up to 1020 mm Frame gap 932 mm Ndedsxbbw Dopfx Abgjd Max. press force 360 kN Max. stroke 120 mm Throat depth 150 mm Serviced by TruServices (last 2/2025) Weight 2600 kg

Condition: used, Year of construction: 2014, DOOSAN DNM 650 II MACHINING CENTER YEAR OF FIRST INSTALLATION: 2014 CNC: SIEMENS SINUMERIK 828 D TABLE DIMENSIONS: 1,300 mm x 670 mm MAX. WEIGHT ON THE TABLE: KG. 1,000 TRAVELS: X: 1,270 mm Y: 670 mm Z: 625 mm TOOL MAGAZINE: 30 POSITIONS TAPER: ISO 40 MAX. SPINDLE SPEED: 12,000 RPM INTERNAL SPINDLE COOLING / HIGH PRESSURE SPINDLE MOTOR POWER: 15 KW Nsdpfewcg I Tox Abgodd MACHINE IN PERFECT CONDITION COMPLETE WITH ALL MANUALS WEIGHT: KG. 8,500

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Nodpfx Aou Au U Tsbgjdd Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW