Table Type Boring and Milling Machine

TOS WHN 13 CNC

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Bdodpfjy H Dahsx Aa Deb Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm Bdedob N Eh Hepfx Aa Djb weight: 1740 kg

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Bdedpfjw Iu Nhjx Aa Djb Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º Bsdpfxsy Hgvro Aa Dsdb W-axis travel (quill): 800 mm Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm Bdjdpfx Aaow Rgcfo Dsb - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Retrofitted in 2001 • Refurbished in 2024 • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine Bedpsy Althsfx Aa Dodb ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13

Year of construction: 1995, condition: used, machine/vehicle number: 0718, 5-axis path control, clamping table size: approx. 1800x1600 mm, HEIDENHAIN control system, industrial cooling SCHIMPKE DK28V, hydraulic unit, electrical cabinet system, coolant treatment unit BMT KMA 1500 800 1000, year of manufacture: 1995, two-door steel cabinet, various accessories, 1 spindle head TA26 Bdsdpfx Aeyzthwea Deb

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm Bsdpju Sbpvsfx Aa Djdb band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. Bjdpfx Asyqmvxja Djdb The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: used, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm Bdedpfxsyqvqre Aa Dsb ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe Bdodexxm A Hopfx Aa Djb FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: used, Year of construction: 1986, TOS - WHN 13.8B CNC - 1986/ 1995 - system Heidenhain TNC155 - 5 motor/ driven axis - moves X/Y/Z/W=3500/2000/800/200 mm - table 1600x1800 - table load 4000 kg Bdedeyl I Huepfx Aa Dob - spindle d130 mm - spindle RPM max 800

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system Bdjdpfsw Hbnvex Aa Deb – Pfannenberg oil cooler – Documentation

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Bdsdpfx Aoxpiw Uoa Dob Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Bsdjwc Ryaspfx Aa Dsdb Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor