TOS SK 16

TOS SK 16

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Iodpfx Ajxg Ivdokxstf Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Anvil weight: 24 ton Iedpfstgpdzox Akxetf

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: Iedpsyh Rmtjfx Akxjtf -Cutting tools -Spacer angle -Technical documentation

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Itjdot H Ty Uopfx Akxef Number of rollers: 2

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment Itodjtpnlwjpfx Akxjf 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg Itedewhp Dnepfx Akxof

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Iedpfev Rpf Sex Akxjtf Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: good (used), functionality: fully functional, Characteristics: Distance between centers: 4500 mm Turning diameter: max. 750 mm Spindl bore diameter: 105 mm Control: Heidenhain Iodpovy Adgjfx Akxjtf Including 2 x chuck diameter 500 mm and 315 mm Including 2 x steady rest

Condition: used, Technical details: Itedjvr S Ulopfx Akxsf spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Itjdpfskw T Rmsx Akxof Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm largest milling length 100 mm with all accessories