Bench drilling machine

TOS Hulín WD 130 CNC

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Pjdpfxsxgnz To Ah Hegg Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series Podpfx Ahjxflxas Hogg The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS Psdpfx Ahow Ed Tfe Hogg total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Pedpfxjx I Nbts Ah Hsgg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Pgjdpfx Ahjwlvlgj Heg Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions Pedpjvvvw Eefx Ah Hegg 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Psdpfxsgabu Uj Ah Hjgg

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Pjdpfx Aow Ew T Ssh Hsgg Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400-2800 Pgsdowc Amxspfx Ah Hog Bar loader available!

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves Pgedpevtmalofx Ah Hsg