Concrete Block Making Plant

Adler Delta 3000

Condition: like new (used), Manufacturer: V. Randwijks Ijdpfxjg Snt So Abnetk Rotor Dia.: 500mm Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Itedpfx Ajxl S Uhjbnjk

Year of construction: 1999, condition: good (used), Built in: 1999 Capacity (A4 stacks packaged): max 20 - 24 Pakete/min Capacity ( A4 stacks loose): max 16 - 20 Pakete/min Itodsdym Srspfx Abnsk Pallet height (incl. pallet): max 1.600 mm Pallet size : max 1.200 - 1.200 mm Size: max 420 x 307 x 320 mm Size: 148 x 110 x 50 mm Equipment: • infeed and buffer section • turntable • infeed table • automatic palletizer • roller track for full pallets • intermediate cardboard slip sheet hopper • pallet dispenser

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Ijdpfx Abewpku Dsnetk Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 Itsdpfxot I D U Es Abnjk - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: good (used), 814 USED Automatic dough sheeter, flattener Seewer Rondo. The device is operational, after inspection. EXTERNAL DIMENSIONS (in cm): - width 115 - length 340 - height 140 ARMS DIMENSIONS (in cm): - width 63 - length 160 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Itsdpfstrtyvex Abnjk bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: as good as new (ex-display), Exterior dimensions: Dia Ø 3600 mm Total H 11000 mm. Cylinder height: 10.200 mm. Vertical stainless steel tanks - 2 pcs. Conical bottom with 4" outlet. Conical top with ventilation. Itodsicgn Tspfx Abnok Manhule at front of bottom. AISI 304. Can be delivered with 1-2 sidemounted agitators. Can be delivered with new isolation completed with optional plates.

Year of construction: 1996, condition: used, Tank & Environmental Protection Wozniack – Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We offer a 100,000-liter double-walled storage tank for diesel, complete with a new diesel dispenser including data recording. Nominal capacity: 100 cubic meters Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted. Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate / test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 filling pipe Quantity: 1 new limit switch Quantity: 1 new leak detection device with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Tank dimensions: Length approx. 15,750 mm Diameter approx. 2,900 mm Weight approx. 16,000 kg Iedoc Nk A Uepfx Abnotk Storage: Above ground Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Inspection of our systems is possible at any time. We have a range of other tank systems for above-ground and underground storage in various sizes available for sale on our premises. All our tank systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank, fire water tank – available. Price / Shipping The price for the tank system is valid ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional fee. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100 Ijdpoud H Dmjfx Abnetk  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2-year guarantee Itjdpfohd I S Aox Abnsk This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. more machines and mixing plants on our website Further information: Intended use: construction, usable material: concrete.