Center lathe

TNM CS6266C

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 105 mm, turning diameter: 660 mm, center height: 330 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 3,700 kg, EX-STOCK PROMOTIONAL OFFER! NEW "CE" CERTIFIED. LATHE WITH MECHANICAL CLUTCH Lhsdpfsyyn Ddsx Aftoi 3-AXIS DRO AND SEMI-NORTON GEARBOX. EQUIPPED WITH JOYSTICK FOR RAPID FEED ENGAGEMENT. ONE-PIECE CAST IRON BED. Center height: 330 mm Max swing over bed: 660 mm Max swing over carriage: 420 mm Max swing in gap: 870 mm Tool height: 32 mm Distance between centers: 2000 mm Spindle bore: 105 mm Spindle mount: Camlock D1-8 Spindle speeds: (12) 36 ÷ 1600 rpm Longitudinal feeds: 0.063 ÷ 2.52 mm/rev Cross feeds: 0.027 ÷ 1.07 mm/rev Metric threads: (22) 1 ÷ 14 mm Imperial threads: (26) 2 ÷ 28 TPI Tailstock taper: MT 5 Motor: 400 V 50 Hz 7.5 kW Coolant pump: 400 V 50 Hz 90 W Dimensions: 3500 x 1400 x 1600 mm Net weight: 3700 kg INCLUDED IN DELIVERY: 320 mm Ø three-jaw self-centering chuck, reversible jaws 400 mm Ø four-jaw independent chuck 600 mm Ø faceplate Travelling steady Fixed steady Rotating tailstock center MT 5 Thread chasing dial Leadscrew guard Tool post guard Spindle guard Rear splash guard Quick-change tool post type C LED work lamp Cooling system Electro-mechanical foot brake Quick-lock tailstock carriage Carriage gears in oil bath Adjustable leveling pads

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Ledpfxoy Ia Hmj Aftshi Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). Ljdpjt Ucpbofx Aftjhi One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. Lhodpfxofn Tvhe Aftsi ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm Ljdpeyh Ndwefx Aftehi distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: excellent (used), Kolbe stainless steel Bandsaws Ljdpjv Aktbsfx Aftshi several Models available Models K430 and 380 saws Fixed tables Offered in guaranteed good working condition Year 2016 / 2018

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer. Lhsdpforfx Utjx Aftji

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Lhedpfxjdzqb Es Aftsi Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 2001, Universal lead and feed screw lathe Manufacturer: GDW Model: LZ 360 S Year of manufacture: 2001 - workshop tested Machine no.: 1104 071 Geometric acceptance with test protocol Centre height: 175 mm Centre distance: 800 mm Accessories: - 3-axis digital display FAGOR NVP 300 TS-RS with switchable constant cutting speed - Retrofit kit for converting tailstock from crank tailstock to lever drilling tailstock - Chuck guard with electrical interlock - Braked drive motor - Emergency stop (dual, left and right) - Quick-change tool post, base body size B - Bed stop - Rear chip guard - Removable chip tray - Coolant unit - 2 fixed centers MK 3/60° - Safety driver plate - Operation keys - CE declaration of conformity Lhedpfx Ajy H Di Noftsi - CE documentation (operation manual) Used, sold as-is without warranty The machine's technical specification corresponds to the manufacturing year.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Ljdpfx Afju Rni Hotshi Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *