Panel saw

Striebig Standard II 5220

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Hfjdpevvkq Tefx Ahvsd Storage location: Nattheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW Hedpfewka S Iox Ahvefd - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Hfodpenxkm Esfx Ahvsd Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Max cutting height: 2200mm Max cutting length: 4200mm Hfjdpsinunqofx Ahvjd Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg

Condition: used, Year of construction: 1996, machine/vehicle number: 272 / 9-604, functionality: fully functional, operating hours: 5,000 h, cutting height (max.): 2,200 mm, total width: 5,700 mm, cutting length (max.): 4,300 mm, main saw diameter: 300 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Hjdew I Er Tspfx Ahvofd

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0 Hodpfxewzlwko Ahvjfd

Condition: used, Year of construction: 2010, operating hours: 14,037 h, machine/vehicle number: 919486, We are offering a KUKA KR150 R3100C KRC2 with ED05 Control. Also, we are offering to overhaul the robot. Hfodsimbtxepfx Ahvsd

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm Hfodpoqlckpjfx Ahvod - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, machine/vehicle number: 1705, functionality: fully functional, travel distance Y-axis: 985 mm, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, HOLZ-HER Vertical CNC Evolution 7405 PinJet, year of manufacture 2025, ex works delivery Workpiece clamping on the rear enables processing of the entire perimeter without reclamping (for workpieces up to 1500mm length) Workpiece size X = 200 - 3200 mm Workpiece size Y = 70 - 1200 mm (= max. passage size) Maximum milling dimension X = 1500 mm (without reclamping) Maximum drilling dimension horizontal X H = 1168 mm Z-stroke Z = 240 mm Hsdpfxox Nqlpo Ahvjfd ECO-MODE energy saving Workpiece length measurement by laser 2x Campus V8 CAD/CAM software with process simulation for both machine and office Handheld remote control unit 2D barcode scanner Control panel with 21.5" flat screen Uninterruptible power supply (UPS) Milling unit 7830, power 10.3 kW Drilling unit 7885 with 19 spindles Vertical adapter with double presser force Integrated saw unit in X-direction Complete dowel unit with step conveyor 6-position linear pick-up tool changer Vacuum system Power 16 m³/h ECO-VAC intelligent vacuum system Hi-Speed USB Device Network Server Automatic central lubrication Xcut package tool set for doors Safety device Pumper Tool set for XL drilling head

Condition: used, Year of construction: 1985, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 2,150 mm, cutting length (max.): 5,100 mm, Machine in very good condition, as shown in the pictures. Hfsdpfx Ahew Upzreved Mains connection: 380V Rated current: 14.7A Saw unit power: 3kW Speed: 2830/5490 rpm