Panel saw upright

Striebig COMPACT 5207

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked Bedpfewyap Esx Ak Eswl - Immediately ready for operation

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Bsdpswm Ih Ajfx Ak Eowl Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: ready for operation (used), A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible. Bwedpfx Aox Sywmsk Eel

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Bwsdpjwka Ntofx Ak Ejl Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device very good condition Max cutting height: 2200mm Max cutting length: 4200mm Bwodpfx Ajinunqok Esl Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit Bwodpfxju R Syie Ak Eol saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology Bwedpfx Aoyxyahsk Eol - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Bwjdpjyf I T Ujfx Ak Eol Scraper knife

Condition: ready for operation (used), A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible. Bwodpewftb Sofx Ak Eel

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: Cutting length: 3600 mm Cutting height: 1644 mm Cutting depth: 60 mm Bedjyxyabjpfx Ak Eswl Saw blade diameter: 250 mm Motor: 3 kW Incl. intermediate workpiece support on all sections Incl. narrow part device Incl. manual length stop Dimensions approx.: 4620 x 1500 x 2460 mm Location: Röllbach Availability: short notice