Cylindrical grinding machine

Strausser-Kellenberger 57U

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Rodpfjvvvw Ejx Adasn Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Rodew N D T Sepfx Adasn Turning length 5000 mm Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Equipment: -2-axis digital readout FAGOR -sine bar -tailstock with fine adjustment Rjdpfx Adjv Tqqnoaon -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Translated with (free version)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 8292, grinding length: 3,100 mm, total width: 1,500 mm, total length: 5,100 mm, total height: 1,800 mm, grinding width: 200 mm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, input voltage: 400 V, grinding spindle speed: 1,800 rpm, coolant pump power: 100 W, grinding spindle motor power: 1,100 W, overall weight: 2,500 kg, grinding wheel diameter: 200 mm, grinding wheel width: 20 mm, table height: 200 mm, table length: 3,100 mm, table width: 200 mm, control cabinet width: 400 mm, control cabinet length: 1,200 mm, control cabinet height: 1,500 mm, New machine, still in original packaging! Rodpfxsx Ezu To Adaon

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine Rsdpfxerz Nflj Adasn - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm Redekw T Rmspfx Adaon largest milling length 100 mm with all accessories

Condition: used, Year of construction: 1977, Surface grinding machine Fabr.Okamoto Type:PSG - 63 UA Bj.1977 Magnet 600 mm X 300 mm. Grinding dimensions : longitudinal 630 mm transverse: 310 mm height : 350 mm Ready for use . Redpfx Adsiz Tmkjaon

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm Redpfxed Enr Ij Adasn -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: ready for operation (used), functionality: fully functional, Manufacturer: LORENZ Model: S8/630 Wheel diameter: 630 mm Wheel width: 180 mm Max. module: 8 Serial number: 12371 Power (kW): 10 Dimensions (L×W×H mm): 3000 × 2500 × 3500 Weight (kg): 5500 Max. workpiece diameter (mm): 630 Max. module: 8 Current condition: fully functional Rjdpfx Adsxakzpsaon

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Redpfx Adsvca Izeaen Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.