Complete sawmill (stationary)

Storti MP350

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated Pjdpfstynpxjx Adnsgw - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Pgedpfx Asdy Hm Nodnsw Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: excellent (used), Year of construction: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (tilting edge cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Wheel width: 130 mm Wheel diameter: 1200 mm Lift up/down – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase motor with brake Electric lifting/lowering motor: 11 kW Saw blade PV 45, length 8685 mm, thickness 1.2 mm, width 140/150 mm Feed drive with electronic controls: forward/reverse feed, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electric disengagement Digital thickness adjustment with Wravor V280 program Hydraulic unit 40 l, tank with two pumps 13+6 l, 3 kW motor Complete hydraulic system Hydraulic blade guide, left and right (linear HIWIN) Hydraulic debarker / bark cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 brackets for pipe Water cooling – automatic hydrofor cooling system (Aki Tech high-pressure pump): 1 Pedow E Ei Uepfx Adnsgw Preparation for ramp and automatic table + spreader: 1 Diesel lubrication system: 1 TRACK Welded frame, 14 m long Hydraulic clamp with two cylinders: 6 Hydraulic cant flipper: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter with mechanical rollers: 4 Hydraulic log lifter with hydraulic rollers: 7 Set of lifting rollers: 7 hyd. + 4 m, 1 pc Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 l, tank with single pump 50 l, 15 kW motor + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile cable tray for ventilation – 4 double trolleys 4 m belt output conveyor with 1 m feed + 3 kW electric motor, front section with hydraulic lift

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Pgedpfx Ask Nf S Usdnsw

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Full bottom floor for waste handling All electrical cabinets and hydraulics Pgsdpfxjikvl Re Adnew

Condition: excellent (used), Year of construction: 2023, operating hours: 1,180 h, overall weight: 28,000 kg, For sale on behalf of the customer! Pgedpfx Ajw Ha Iuednjw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed. Pgedpfxswya Syo Adnsw

Condition: used, Year of construction: 2000, Debarking unit type VK 32 !! Sale on behalf of customer !! Pjdpfxewwladj Adnogw

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Pedpfou Atmusx Adnegw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The following machines, all in very good condition, are available for sale – perfectly suited for professional use in the wood processing industry. Saw line consisting of: • Feed unit ZV21, model EV 50 • Profiling chipper ZD31, model VM50 • Outfeed unit AV31, model VZM • Centering device VZ21, model VZV • Log rotation device DV21, model DV70-2 • Infeed and centering unit EVP • Profi Chipper VM50 • Profiling unit VMP450 F61 (4x110kW) • Microtec measuring system Additionally available Other used woodworking machines ?️ Also available: Additional used woodworking machinery Log infeed Springer  • 5-arm design  • Log distributor (5-arm)  • Receiving tipple transfer (26 m) Log rotation device LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 units chipper infeed – infeed and centering unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separator conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 units LINCK chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – left & right side  • Dimensions: 2.8 m x 2.1 m x 2.5 m (each)  • Weight: 3 t each LINCK pre-centering unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log infeed with loader and log conveyor Psdpfx Adow Stiujnegw Location & Availability All machines are located at our warehouse, A-3525 Lugendorf No. 38, and are available immediately. Price upon request For further information or to arrange a viewing appointment, please do not hesitate to contact me.