Horizontal Milling Machine

Steinel SH 3,5

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted Cjdpfsd Nl E Usx Ab Tjrk - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, machine/vehicle number: 0001210226, pattern table size: 236 x 460 mm working table size: 200 x 500 mm working area longitudinal: 300 mm Crodpfsbv S Elex Ab Tjk working area cross: 160 mm spindle turning speed range: 1900 - 15000 rpm milling proportion: 1 : 1 105x165/1 : 5 44 x 80 mm space needed: 800 x 900 x 1250 mm weight: 340 kg

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Multifix size C with holders coolant device. Credpfxogqxcio Ab Tjk turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 Crsdpfx Ajd Hl Stob Tjk weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Special pricing currently available for new machines ordered this year! ==> A fully refurbished used machine is also available after reconditioning. Please enquire separately. ==> ==> Information for manufacturing companies or dealers with in-house production: Drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including versions for a 9-ton pull force variant) for the broaching machine may be purchased from us. Please contact us if interested. Codpfxeuqbnhe Ab Terk ==> Our new machines are manufactured to order. Short lead times for production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special needles for internal splines, etc.) and accessories are available upon request. Feel free to enquire separately. Our broaching machines are compatible with all broaching tools and holders from other manufacturers as well! Complete production and assembly at our factory in Germany. Rapid delivery upon agreement. Additionally, we offer spare and wear parts (spindles, spindle nuts, motors, gears, and all other required components – including electrical parts) for both Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: Main application is producing keyways from 3–28 mm and profiles of similar dimensions. Its compact, space-saving design makes it suitable for small, medium, and large workshops. Its low investment cost justifies use for small batch and single-item production. Power is transmitted via a pole-changeable geared brake motor. The maintenance-free dual-spindle drive ensures smooth operation, centralized pull point, and consistent cutting performance. The open tool table accommodates even large workpieces easily; typically, clamping is unnecessary. Stroke adjustment is performed with adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple pieces may be stacked. Broaching needles, mandrels, and spare parts available at attractive rates upon request. Technical Data: Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min Broaching speed: 3 m/min & 6 m/min (Optional stepless speed control from 0 to 6 m/min with upgraded electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Outer RAL 7035/7036/7016, inner RAL 3000 or customized Safety door: standard equipment Coolant system: standard equipment The machine complies with the current Machinery Directive and bears the CE mark.

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, QUOTE Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm Crsdohglvkjpfx Ab Tjk - Drilling spindle mounting MK 3-long spindle - drilling spindle stroke 180 mm - Drilling spindle speeds infinitely variable approx. 140 - 1600 rpm - 3 feeds 0,1 ; 0,2 ; 0,3 mm/rev - throat 290 mm - max distance table - drilling spindle 620 mm - rotary table with 2 T-slots 450 mm - Height adjustable via toothed rack with hand crank - Coolant device - Drive 380 V / 0,9 / 1,3 kW - Space requirement approx. W 750 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: used, functionality: fully functional, Locatelli Ariete 3 automatic lathe machine Length of scantling max/min 1000/200mm Scantling size max/min 85×85/20x20mm Maximum workpiece length 120mm with hole 150mm without hole Automatic material feeder Complete DTR documentation 3/4kw main motor Two spindle speeds 2500/3600rpm Codpfxsu Rqkmj Ab Tsrk Oil pump motor 2.2kw Working pressure 6-8bar

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Crjdpfxsh Dwr Ue Ab Tjk Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Addendum to the measurement report!

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage Crjdpfsnzpx Rex Ab Tok -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Crjdpfov Ifxijx Ab Tjk Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,