Engraving machine

DECKEL G 1 U

Condition: ready for operation (used), Year of construction: 2014, Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible. Kjdpfx Adern Ta Ujqsnd

Year of construction: 2021, condition: refurbished (used), Refurbished DIAFORM unit f. JUNG HF50 / JF 520 Ksdpfx Ajhcn R Isdqjnd

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc. Ksdecxxrgjpfx Adqond

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including HR 520 handwheel Machine hours Machine under power: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours of current milling spindle: approx. 150 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Working table Clamping area: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Knedpfx Aswa T Hkedqjd Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives X/Y/Z axis feed rate: up to 60 m/min X/Y/Z axis acceleration: up to 5 m/s² The machine is currently set to the following default values because there was insufficient power available on site! X/Y axis feed rate: up to 40 m/min Z axis feed rate: up to 30 m/min X/Y/Z axis acceleration: up to 2.5 m/s² Connection data Connected load: 190 kVa Back-up fuse: approx. 315 A The machine can be reset to its original values at any time if sufficient power is available. The following reduced connection values apply: Connected load: 130 kVA Back-up fuse: approx. 250 A Dimensions, weight Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 fluorescent green Description: Additional equipment - Coolant supply with belt filter system - 50-station chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition. Already disassembled and stored.

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Y-path: 300 mm Kedpfeqgcimox Adqjnd X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Year of construction: 2004, condition: used, -Manufacturer: Pieralisi -Type: FPC 12 CH01 -Year of construction: 2004 Kjdpfsp Dumdox Adqsnd -Drum volume: 13 L -Drum diameter: 396mm -Max. speed: 6450 rpm -Motor power: 15 kW -Areas of application: chemistry, pharmacy, food industry -Complete control & extensive documentation available

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer Kedpfx Adofgyh Uoqond • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Wine tanks and for other liquid: - 2080 lit - 3110 lit Knsdpfjtzz H Ssx Adqjd - 4290 lit - 5150 lit - 7520 lit - 9390 lit - 10650 lit - 11750 lit - 12520 lit - 18020 lit

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions Kneded Tytyepfx Adqod -used, as seen-

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, workpiece weight (max.): 130 kg, center width: 600 mm, grinding wheel diameter: 450 mm, total width: 2,110 mm, total length: 3,120 mm, total height: 1,435 mm, grinding diameter: 350 mm, quill stroke: 30 mm, grinding wheel width: 50 mm, grinding spindle speed: 2,000 rpm, overall weight: 3,100 kg, Max. Sanding diameter: Ø350mm Ksdpfxec Tnq Ie Adqond Max. Workpiece weight: 130 kg Sanding length between centers: 600 mm Sanding spindle speed: 1500 or 2000 rpm (manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - 120 liter coolant tank with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard - Hydraulic unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange Dresser - Dressing holder with dressing diamond on tailstock - 2 centering centers - Dial gauge for table adjustment to 0 - Machine light - 3 unscrewable hooks for transportation by crane - Leveling screws with mounting plates - Machine documentation Including the following special accessories: - Internal grinding device - Inverter (Mitsubishi) for speed control on the work spindle - Inverter for speed control on the grinding spindle with 5.5 kW motor, incl. display - 2-axis digital display Heidenhain ND 780