Milling machining centers - vertical

STAMA MC 535 SM

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm Itjdpfjt Hwtfsx Ah Nsb total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Iedpfxeuw Sq Us Ah Notb Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Itjdeur Hfzjpfx Ah Nob

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection Iedpfxehigmbo Ah Netb All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical Data: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double gripper tool changer - Automatic swiveling milling head Itsdpju Rnlusfx Ah Neb - Rotating viewing window - NC rotary table with pallet support - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring SK 40, mechanical version, range: 63...310 mm / +/- 3 mm - Interval control for chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides Isderz Nflspfx Ah Netb - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. tool taper HSK 63 toll turrets 60 weight 9600 kg Itjdpfx Ahsqn A Rkj Neb

Year of construction: 2000, condition: good (used), CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available. Iodsfrbckepfx Ah Njtb

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Isdpfou E Uzxsx Ah Nstb Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 Isdpowh U D Hsfx Ah Nstb 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat