Skoda W 200

Skoda Pilsen W 200

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Credpfxjwulzve Albog Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Cjdpfok Dz N Iex Albjrg max turning diam 1100mm range of turning diam 460-1250mm

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Codpfx Aohcnxrolberg Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Credpfxeur H I No Albsg Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) Crsdoq Rdtqepfx Albjg - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Cedpfx Aleymk E Ajbsrg Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), centerless grinding machine Cedjtrguvepfx Albjrg

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Credperwx U Iofx Albjg Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Crodoqcvkvjpfx Albog Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Credpfxsh In Ths Albjg Speed -80' m/min. Reconstruction- 2022