Thickness planing machine

Sigma RT530

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Dcodpfx Ajq Auhdeb Tjr Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: excellent (used), SCM S520 thicknesser Djdoitkx Ejpfx Ab Tjcr Working width 520mm Working height 250mm Feed speed adjustable: 4 steps Shaft with conventional knives 4 knife shaft Power 4kw Weight 670kg

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Dcedpfx Abev I Eats Tsr Storage location: Nattheim

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 Dcjdpfx Abew Rc H Hs Ter - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm

Condition: ready for operation (used), Technical characteristics En cours de vérification Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Dedpfx Aeuciqasb Tocr Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Motor: 7,5 CV Overall dimensions

Condition: used, Year of construction: 1961, operating hours: 7,027 h, power: 14 kW (19.03 HP), next inspection (TÜV): 01/2026, The tractor is in unrestored but good condition and is fully functional. This is a private sale. Type * Box-shaped central tube support Engine * Air-cooled, two-cylinder, four-stroke, in-line diesel engine with direct injection from MWM * MWM AKD 311Z, displacement 1400 cc, 19 hp, bore = 90 mm, stroke = 120 mm. Clutch: Single-disc dry clutch Transmission * Fendt, 6-speed range transmission (combined gear and dog clutch transmission) with 6 forward gears and 2 reverse gears on a single lever with a double H-shift. * Rear wheel drive Brakes * Foot-operated two-shoe brake acting on both rear wheels, designed as a steering brake. Handbrake as a duplex brake, acting on the transmission. Axles * Fendt rigid front axle with central tube, suspended. Axle load front = 900 kg, rear = 1290 kg Hydraulic system and power lift * Independent hydraulic pump, driven directly by the engine. Bosch hydraulic pump 11.0 liters/min, 110 bar. Dimensions and dimensions * Length = 3163-3420 * Width = 1517-1520 Dsdpfjwggplox Ab Tecr * Height = 1580. Ground clearance = 360 mm. * Permissible weight Total weight = 2190 kg Tires * Front tires 5.50-16 * Rear tires 8-28 Capacities * Fuel tank 20 liters * Hydraulic tank 5.5 liters, with tipper 11.0 liters * Transmission oil 13 liters * Engine oil approx. 4 liters

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets Dcjdpfx Asvwgmasb Tor - 3-jaw chuck - 4-jaw face plate - steady rest

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Djdpfsvkuqmjx Ab Tjcr Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2024, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. Dcjdpfx Ajq Nl Aqeb Tsr -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Dcodpfx Abowhqw Ne Tjr Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee