Welding Table

SIEGMUND Workstation Set 22

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit Gijdpslgvkijfx Ab Dst - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Gjdpfoh Tnd Ajx Ab Doit Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Gsdjdvn E Uspfx Ab Deit Horizontal disc mass 1200mm up to 1900mm

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 250 kg, Equipment: crane, GEDA KOSI GRAĐEVINSKI LIFT COMFORT 250 12M NOVO TIP: GEDA COMFORT, NOVO, 2026. god. Proizvođač: GEDA, Njemačka Pogon: 1,3 kW/230 V/50 Hz Nosivost: max 250 kg Brzina dizanja: 30 m/min Pribor za visinu dizanja do 12 m se sastoji od: - Elektromotor - Zaglavak s koloturom Godpfexvyagex Ab Deit - Standardna kolica sa sigurnosnom kočnicom - Početna tračnica 2,0 m - Produžetak 250/2 m x 4 kom - Produžetak 250/1 m - Koljeno(od 20 do 45*) - Univerzalna košara ( 82 x 35 x 70 cm) +++++ ++GEDA KOSI LIFT MOŽETE DOBITI I SA 200KG NOSIVOST-MODEL 'STANDARD'++ +++++ +++++ZATRAŽITE JOŠ POVOLJNIJU PONUDU ZA GEDU STANDARD 200 +++++ +++++GEDA JE IDEALNA ZA DIZANJE SOLARNIH PANELA+++++ +++ZA VISINU DIZANJA DO14M DODAJE SE JOS JEDNA TRAČNICA OD 2,0 M++++ ++++POSEBNA PROMOTIVNA CIJENA ZA 14M: CIJENA NA UPIT+++++ +++MOŽETE ISTO KUPITI 10M, 16M, 18M, 20M itd.+++++ +++++ +++++VIŠA VISINA GEDA LIFTA OD 21m:+++++ ++++SA 43 M SAJLE MOŽETE SLOŽITI GEDU DO MAX. 21M DIZANJA+++ +++SAMO DOKUPITE JOŠ 2-METARSKIH TRAČNICA+++++ +++MOŽETE ODABRATI RAZLIČITE VISINE DIZANJA--10M, 12M, ILI 16M+ ++++18m++20m++22m++24m++26m++28m++itd.+++++ +++++PRIKAZANA CIJENA JE ZA 12M+++++ +++OVISNO KOLIKO 2-METARSKIH TRAČNICA KUPITE+++++ +++AKO VAM JE POTREBNA VEĆA DUŽINA OD 21M - UGRAĐUJEMO ++ +++++VAM++++GRATIS++DUŽU SAJLA OD 63M+++++ +++++ +++++OD PROFESIONALCA ZA PROFESIONALCE+++++ +++++ MONTAŽA MOGUĆA ISTO NA TERASE, BALKONE, RAVNE KROVOVE+++ +++ILI PROZORE TE UZ SKELU KAO OKOMITA DIZALICA+++++ ++ZA DIZANJE MATRIJALA KOD FASADERSKIH RADOVA+++++ +++++UZ GEDA VARIO-PREINAKU+++++ +++++(NIVELIRANJE KOŠARE U VODORAVNI POLOŽAJ)+++++ +++++ DOBIVATE OKOMITU DIZALICU +++++ +++++DAKLE DOBIJETE 2 DIZALICE U JEDNOJ +++++ ATEST za kosi građevinski lift od ovlaštenog poduzeća za ispitivanje i kontrolu. +++++ +++ORIGINAL GEDA UPUTSTVO ZA MONTAŽU I RUKOVANJE NA HR-JEZIKU+++ +++++ +++AKCIJSKA CIJENA GEDA 250 SAMO++4.900 +++++ +++AKCIJSKA CIJENA GEDA 200 SAMO ++4.200 +++++ +++++GARANCIJA 12 MJESECI!+++++ +++++ +++++UVJEK NA LAGERU SPREMNO ZA ISPORUKU VIŠE KOMADA GEDA LIFTOVA +++++ +++++STANDARD 200KG +++++TE+++++COMFORT 250KG +++++ +++++ZA SVA DODATNA PITANJA NAŠ TIM STOJI NA RASPOLAGANJU+++++ NAJBOLJE NAS NAZOVITE I SAZNAJTE KOJI JE GEDA KOSI LIFT NAJBOLJI ZA VAŠE POTREBE +++++ ++++MI SMO GLAVNI OVLAŠTENI ZASTUPNIK I +++++ SERVISNI CENTAR ZA GEDA ORIGINAL GRAĐEVINSKE DIZALICE U ++ REPUBLICI HRVATSKOJ++VEĆ PREKO 30 GODINA+++++ +++++

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Giodof Ekn Ijpfx Ab Djt • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Giodpfsd A Etujx Ab Dst

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm Gijdpfx Ajyhhuwob Dst STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Gisdpex I Rdiefx Ab Dst Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): Gijdpfx Abevxid Re Dot 2,277.00 € plus VAT Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 Godpfx Abehua Dqj Deit hand and foot remote control with speed indicator very robust