Welding table equipment

SIEGMUND SET 3 / 28

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp Fgodjw U U N Uopfx Alqob + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Year of construction: 2024, condition: new, The rolls cruhser RC 200 is ideally suited for crushing medium-hard, brittle, hard samples like coal, ore, slage, minerals, graphite and many more. Fsdef Ulycspfx Alqsgb Max. feed size*

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs Fjdpjxabffsfx Alqjgb - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, number 65 Positionen 28 mm condition neu weight 49 kg Basic-Set 3: 69 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Fedpfx Ajupw Stelqsgb Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 3 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Fjdpebnfxujfx Alqegb Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Fsdpfx Aled A Etuoqjgb

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) Fodpfx Alot N Antoqsgb - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Fedpof Ekn Dofx Alqsgb For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge - Adjustable stroke Fsdpeh Ramgofx Alqsgb

Condition: excellent (used), Year of construction: 2006, Technical Data: Working width: 2100 mm Bending capacity: 28.0 mm Pre-bending: 22.0 mm CNC control Top roller diameter: 350 mm Middle roller diameter: 330 mm Side roller diameter: 240 mm Hardened rollers Conical bending device via tilt adjustment of both side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (L x W x H): approx. 3600 x 1500 x 1500 mm Fgodpjx Dtt Ajfx Alqob Weight: approx. 4.5 t The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technical condition, and wear conform to its age; used machines are sold without any warranty.