Bed type milling machine

SHW UF 5 - 1500

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min Gujdpfsx Tiy Tjx Agfja size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gedpfx Asuddgljgfjua Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Godpfev Igghsx Agfeua Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm Guodpfx Asvprxfsgfsa table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Gusdorkgy Uopfx Agfja

Condition: new, Ostas 3-roller round bending machine SBM 1270 x 95 Special equipment included in the price: Gsdpfx Ageg Tzbhofeua Hardened rollers Motorized rear roller adjustment Digital display Features: - Asymmetrical 3-roller round bending machine with motorized drive - Hardened rolls - Motorized rear roll adjustment - Digital display - Upper roll can be swung out - Conical bending device - foot switch Technical details: - sheet width: 1270 mm - sheet thickness: 3,0 mm - roll length: 1270 mm - Roll diameter: 95,0 mm - Smallest bending diameter: 140,0 mm - Motor power: 1,1 kW - Dimension L-B-H: 2100 x 760 x 1250 mm - weight: 470 kg

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min Gusdpfx Asd Izmajgfsa sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Godpjwcg Elefx Agfjua Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Gujdowzypuopfx Agfoa Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Guodpfx Aodvn E Usgfea Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm