Surface planer and thickness planer

SCM L´invincibile FS 7

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) Ksdpowwv Ufofx Ah Njdg - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Kedpjglfv Sjfx Ah Nedg Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Condition: excellent (used), functionality: fully functional, axle configuration: 4x4, Year of construction: 2010, operating hours: 4,212 h, For sale freshly imported from Denmark Spindle mower for leveling football pitches or golf courses, The mower is characterized by the fact that it has a cabin and is a JOHN DEER with a YANMAR engine manufactured in Japan, it has 5 mechanisms for leveling grass 5x75cm in total 3.45m cutting width. Fully functional, regularly serviced comes from the first owner who worked with it on the golf course. Mileage approx.: 4200 mth Year of production: 2010 Everything is functional. Kodpfx Ahewc Rcbj Nodg Technical data: Yanmar engine Capacity 2.1cm3 Power: 31kW 4 cylinders diesel Cutting width: 3.45m Maximum speed: 15kmh Hydrostatic drive 4X4 - with the possibility of adjustment Has a cabin Equipment: Radio Heating Lights Turn signals Wipers Adjustable seat Traction control Control everything in the cabin == The John Deere 1905 series, five-unit reel mowers, have a total cutting width of 345 cm (136 in) with a working speed of up to 15 km (8 miles) per hour. Designed primarily for use on golf courses and football pitches, this four-cylinder mower is equipped with a 51 HP (max) Yanmar diesel engine, hydrostatic transmission, Command Arm control and four-wheel drive. From the outset, the models have been equipped with 76 cm (30 in) wide ESP reels, which is particularly important for golf course managers, for whom top performance is of the utmost importance.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Kdodpfxet R T Hcs Ah Nsg Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Kodpfx Aepq If Doh Nodg Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Ksdpfxjwh U Eqe Ah Nsdg Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Kedpfx Ahevug Dyo Njdg Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer Kdodpfx Ahjipvrbo Nog 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: excellent (used), Year of construction: 2015, operating hours: 167 h, For sale at a bargain price, a wireless lawnmower controlled by a remote control, is ideal for difficult conditions such as steep roads or dangerous places. (see Video) It has 4-wheel drive and a long range remote control. It will mow up to 1500m per hour. - A bargain price because of the winter season, it will be 20% more expensive in the spring! So it is recommended to buy this equipment now! Of course, fully functional and ready for further work. - Straight from a bankrupt company from Sweden. The new one cost them over 25 4-wheel drive, remote control - everything is 100% functional. The lawnmower was purchased in December 2014 and only used in the spring of 2015! Key data: Performance / Consumption Engine Briggs & Stratton 950 Displacement 223 cm3 Fuel tank capacity 4 l / 1 gallon Fuel unleaded petrol Hydrostatic transmission Speed 0 - 4 km/h / mph Wheel steering Blade 1 rotary Kedpfsvv Hi Eox Ah Nodg Cutting width 56 cm / 22 in Cutting height 4 - 9 cm / 2 - 4 in Manual clutch Option Mulching kit 2 Capacity up to 1500 m/h Fuel consumption 1 l/h Gradeability 30 degrees / 58% Dimensions 1040 x 900 x 600 mm Weight 125 kg Transportability in Poland and the European Union!

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Kodpfer Ilxvjx Ah Nodg