Mobile exhaust system

SCHUKO 90/2/140

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescopic, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Overall length: 7.55 m Overall height: 3.45 m Podownq Dpjpfx Adnegw Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Condition: good (used), Dividing head with 24 he direct Division or crank to Scala 200 he Röhm feed Pjdpfx Aedx D Rzsdnsgw GES. Height 165 mm Depth 350 mm Width: 300 mm Weight 34.5 kg

Condition: new, Year of construction: 2025, Multitel MTE 270 on Iveco "Daily" - 3.5t truck-mounted access platform (self-propelled work platform/lifting platform) - year 2023 - NEW with warranty - Pjdpfx Aoq T Nycsdnjgw

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case. Pgjdpfxeghgbhe Adnjw

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm Pjdpshwwpzsfx Adnogw ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Pgodpfx Adsv Rv Dbjnew Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete Pgsdport H Izofx Adnsw essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: used, mileage: 48,677 km, power: 130 kW (176.75 HP), first registration: 01/2011, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, electronic stability program (ESP), parking heater, Nissan Cabster 35.13 PALFINGER Steiger 26 meters 4x2 Suspension: spring / leaf Wheelbase: 2.95 m PALFINGER Steiger Type: P 260 B Year of manufacture 2011 4x hydraulic extension 4x hydraulic support points Psdepvli Sopfx Adnegw 1x work basket (1.40 m x 0.70 m x 1.10 m) Equipment: - Electric window lifter - Auxiliary heating We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Year of construction: 1972, condition: ready for operation (used), Table Ø: 300 mm Overall height in horizontal position: 155 mm Width: 500 mm Depth: 500 mm Psdod Rlifspfx Adnjgw

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Podpfx Adjvadxljnsgw Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980