Hydroforming press
SCHULER SHP 35000-3150/2150

Name: SCHULER SHP 35000-3150/2150
Brand: SCHULER
Price: 495000 EUR
Availability: InStock

Fixed price plus VAT

€495,000

Year of construction

1998

Condition

Used

Location

Salach

Hydroforming press SCHULER SHP 35000-3150/2150

Show map

Machine data

Machine type:: Hydroforming press

Manufacturer:: SCHULER

Model:: SHP 35000-3150/2150

Year of construction:: 1998

Condition:: used

Price & Location

Fixed price plus VAT

€495,000

Location:: Lager Salach, Baden-Württemberg

Call

Details about the offer

Listing ID:: A18366726

Reference number:: 1050-143056

Update:: 20.11.2025

Description

pressure 3500 t
stroke 900 mm
Distance table / ram, stroke down 1000 mm
distance table / ram, stroke up 1900 mm
table surface area 3150 x 2150 mm
ram surface 3150 x 2150 mm
Total Weight of Tool max. 30,0 t
Weight of Tool Top Part max. 20,0 t
speed down 400 mm/s
working speed 0,9 - 9,2 mm/s
Hydraulic Operating Pressure 280 bar
oil volume 5500 l
rated current 760 A
voltage 400 V
frequency 50 Hz
power requirement 425 kW
weight 231,0 t
Hydroformpress / IHU-Press
maximum preforming force approx. 1000 t
Total tool weight approx. 30 t
upper tool weight approx. 20 t
· Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed
· Parallelism control: over the length side of the press
· Light curtain: front and back side
· Light barrier: left and right side
· Slide locking: TDC-Position
· Two-hand control panel: 1
· Independent high pressure circles water hydraulic system: 2
· Max. working pressure: 3.000 bar
· Displaced volume of each Intensifier: 3,74l
· 2 Filling pumps: volume and pressure depending the power grid
· Location of pressure intensifier: to be determined
· Main pumps: located on the press crown/oil tank
· One die change table: 6,7 x 2,15 m
· Max. die size: 3,15 x 2,15 m
· Clamps on slide: Hydraulic
Caedpfx Abjvuukhj Toa
· Clamps on the bed: Mechanical
· Electrical control: Schuler Multiview HF

Attention:
This machine is a EU re-import!
If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation
This work is not part of the offered price
as is where is, WITHOUT putting into operation, stored in dismantled condition

Seller

Registered since: 2013

190 listings online

Call

Send inquiry

Telephone & Fax

+49 7161 ... show

Fax:

These listings may also fit your interest.

Listing

QUASER MV204II universal milling machine QUASER MV204II

Schloß Holte-Stukenbrock

18,427 km

QUASER MV204II universal milling machine
QUASERMV204II

Call

Condition: good (used), Year of construction: 2002, machine/vehicle number: 120K587, Hello, For sale is a well-preserved Quaser MV204II universal CNC milling machine with HEIDENHAIN control at an unbeatable price-performance ratio The purchase price includes: tool changer, measuring probe, chip conveyor, coolant system, hydraulic system, documentation/machine documents, etc... Data machine dimensions Height: 2,825mm Width: 2,650mm Length: 2,200mm Weight: 7,500Kg Data travel paths X-axis travel: 1,020mm (feed speed 32,000mm/min) Y-axis travel: 600mm (feed speed 32,000mm/min) Z-axis travel: 560mm (feed speed 32,000mm/min) Milling table data Milling table size: 635 x 1,200mm Milling table loading capacity: 1,000Kg Table configuration: 6 x 18mm H 8 T-slots Milling spindle data Max. spindle speed: 7,500 / 10,300 1/min Max. spindle torque: 252Nm All further data available on request by email!!! Casdpopfawhjfx Ab Tja Viewing appointment possible. Best regards

See details

Listing

Wheel Lathe Rafamet UBB 112/2 Rafamet UBB 112/2

București

17,468 km

Wheel Lathe Rafamet UBB 112/2
RafametUBB 112/2

€45,000

FCA Fixed price plus VAT

Call

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Cajdpfxohvml Ie Ab Tja Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

See details

Listing

Laser pipe cutting machine 12 m Rohrlaserschneidmaschine 12 kW 12045ETP / 450 mm Option bis 510 mm

Leipzig

18,263 km

Laser pipe cutting machine
12 m Rohrlaserschneidmaschine 12 kW12045ETP / 450 mm Option bis 510 mm

€295,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source Cajdpfx Aboi Apfzj Tsa 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

See details

Listing

Drilling and sawing line Ficep RAPID 35T

Ulft

18,532 km

Drilling and sawing line
FicepRAPID 35T

Call

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 35313, Ficep Rapid 35T Automatic Drilling & Sawing Line Caodot Nzlqepfx Ab Toa Automatic CNC high-speed drilling and sawing line for angles/miters: RAPID 35T Angle size (410 N/mm²) (min. mm): 60x60x6 Angle size (410 N/mm²) (max. mm): 350x350x40 Drilling heads (qty): 2 Drilling tools per head (number): 3 (6) Drilling diameter (mm): 40 Spindle power (kW): 19 (27) Spindle speed (max. RPM): 3500 Spindle stroke (mm): 200 Cutting unit: Circular saw The feed and discharge lengths for this line are as follows: Feed: 16M Discharge: 12M If you would like more photos or information, please contact us.

See details

Listing

Dryer (agriculture) Industrial belt Dryer Heinen BT24/380-3

Palanga

17,508 km

Dryer (agriculture)
Industrial belt DryerHeinen BT24/380-3

€120,000

ONO VAT not applicable

Call

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Factory consists of: Conveyor dryer: • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); Caedpfxevt Rmvo Ab Toa • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

See details

Listing

Gear Shaping Machine GLEASON- PFAUTER GP 130

Gerolstein

18,653 km

Gear Shaping Machine
GLEASON- PFAUTERGP 130

Call

Listing

Laser cutting machine TRUMPF TruLaser 5030 FIBER + Liftmaster Compact

Slovakia

18,105 km

Laser cutting machine
TRUMPFTruLaser 5030 FIBER + Liftmaster Compact

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 45,208 h, laser hours: 32,072 h, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 240 m/min, feed rate Y-axis: 240 m/min, feed rate Z-axis: 240 m/min, positioning speed: 240 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 115 mm, working range: 3,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. The machine is also sold as a Liftmaster Compact. Cajdpfxev Im Irs Ab Toa

See details

Listing

Essenbach

18,429 km

Press brake
AMADA PROMECAMHFP NT 100-3

€59,999

ONO plus VAT

Call

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Codpfetwliwsx Ab Teaa Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

See details

Listing

BYSTRONIC HYDRAULIC BENDER 3100X150 BYSTRONIC PR 150 X 3100

Prevalle

18,678 km

BYSTRONIC HYDRAULIC BENDER 3100X150
BYSTRONICPR 150 X 3100

Call

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. Cjdpfevxipgjx Ab Tjaa X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

See details

Listing